سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
سمتهای علمی و اجرایی در مجلات و ژورنالهای معتبر ایران
مقالات بین المللی خارج از کشور
- "Application of the Local Approach to Predict Load History Effects in Ferritic Steels", ASMEDC, (2005), Vol , No :
- "Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions", ASTM International, (2006), Vol 3, No 4: 12568
- "Measurement and Prediction of the Residual Stress Field Generated by Side-Punching", ASME International, (2006), Vol 128, No 3: 451-459
- "Generating Well Defined Residual Stresses in Laboratory Specimens", ASMEDC, (2006), Vol , No :
- "Using local out-of-plane compression (LOPC) to study the effects of residual stress on apparent fracture toughness", Elsevier BV, (2008), Vol 75, No 6: 1516-1534
- "Residual stress measurement by deep hole drilling and trepanning – analysis with distributed dislocations", SAGE Publications, (2008), Vol 44, No 1: 45-54
- "A New Procedure to Measure Near Yield Residual Stresses Using the Deep Hole Drilling Technique", Springer Science and Business Media LLC, (2008), Vol 49, No 4: 595-604
- "The Effect of Boring After Autofrettage of Pressure Cylinders", ASMEDC, (2009), Vol , No :
- "Experiments and predictions of the effects of load history on cleavage fracture in steel", Elsevier BV, (2010), Vol 77, No 4: 631-645
- "Corrigendum to “Experiments and predictions of the effects of load history on cleavage fracture in steel” [Engineering Fracture Mechanics 77 (2010) 631–645]", Elsevier BV, (2010), Vol 77, No 6: 1030
- "Effect of Gauge Volume on the Residual Stress Measurement Using Deep Hole Drilling Technique", ASMEDC, (2010), Vol , No :
- "Application of the Modified Deep Hole Drilling Technique (iDHD) for Measuring Near Yield Non-Axisymmetric Residual Stresses", ASMEDC, (2009), Vol , No :
- "The effect of plasticity on the ability of the deep hole drilling technique to measure axisymmetric residual stress", Elsevier BV, (2011), Vol 53, No 11: 978-988
- "Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm", Elsevier BV, (2011), Vol 50, No 3: 1114-1122
- "J-integral and CMOD for external inclined cracks on autofrettaged cylinders", Springer Science and Business Media LLC, (2011), Vol 169, No 2: 199-212
- "Application of Deep Hole Drilling to the Measurement and Analysis of Residual Stresses in Steel Shrink-Fitted Assemblies", Wiley, (2010), Vol 47, No : 412-426
- "An application of Chaboche model to predict uniaxial and multiaxial ratcheting", Elsevier BV, (2011), Vol 10, No : 1924-1929
- "A Neural Networks approach to characterize material properties using the spherical indentation test", Elsevier BV, (2011), Vol 10, No : 3062-3067
- "The effect of shot peening on fatigue life of welded tubular joint in offshore structure", Elsevier BV, (2012), Vol 36, No : 250-257
- "An Alternative Approach to Determine Material Characteristics Using Spherical Indentation and Neural Networks for Bulk Metals", ASTM International, (2012), Vol 40, No 2: 103897
- "Fatigue Life of Repaired Welded Tubular Joints", International Digital Organization for Scientific Information (IDOSI), (2013), Vol 26, No 1 (A):
- "Analysis of resistance of concrete target against penetration of eroding long rod projectile regarding flow field around the projectile tip", Elsevier BV, (2013), Vol 57, No : 36-42
- "A Procedure to Measure Biaxial Near Yield Residual Stresses Using the Deep Hole Drilling Technique", Springer Science and Business Media LLC, (2013), Vol 53, No 7: 1223-1231
- "Numerical and Experimental Study of the Plasticity Effect on Residual Stress Measurement Using Slitting Method", Trans Tech Publications, Ltd., (2013), Vol 768-769, No : 107-113
- "A Novel Cutting Strategy for Measuring Two Components of Residual Stresses Using Slitting Method", Springer Science and Business Media LLC, (2014), Vol 54, No 7: 1237-1246
- "A Neural Networks Approach to Measure Residual Stresses Using Spherical Indentation", Trans Tech Publications, Ltd., (2013), Vol 768-769, No : 114-119
- "Influence of asymmetrical cuts in measuring residual stresses using contour method", Elsevier BV, (2015), Vol 134, No : 1-10
- "A Novel Method to Determine Material Properties and Residual Stresses Simultaneously Using Spherical Indentation", ASTM International, (2014), Vol 43, No 1: 20130236
- "Spherical Indentation, Part II: Experimental Validation for Measuring Equibiaxial Residual Stresses", ASTM International, (2015), Vol 44, No 6: 20150252
- "Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior", Elsevier BV, (2016), Vol 657, No : 309-321
- "Ductile to brittle failure transition of HSLA-100 Steel at high strain rates and subzero temperatures", Elsevier BV, (2016), Vol 158, No : 179-193
- "A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening", Elsevier BV, (2016), Vol 90, No : 478-487
- "Determination of mechanical properties using sharp macro-indentation method and genetic algorithm", Elsevier BV, (2017), Vol 114, No : 57-68
- "A modification to the cross slitting method for measuring two components of residual stresses", SAGE Publications, (2017), Vol 52, No 2: 93-101
- "Failure analysis of bolt connections in fired heater of a petrochemical unit", Elsevier BV, (2018), Vol 92, No : 327-342
- "Effect of initial surface treatment on shot peening residual stress field: Analytical approach with experimental verification", Elsevier BV, (2018), Vol 137, No : 171-181
- "Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers", International Digital Organization for Scientific Information (IDOSI), (2019), Vol 32, No 1:
- "Shot peening effects on corrosion behavior of commercial pure titanium in body simulating solution", IOP Publishing, (2019), Vol 6, No 11: 116556
- "Shot peening effects on residual stresses redistribution of offshore wind monopile multi-pass weldments", Elsevier BV, (2019), Vol 66, No : 106-120
- "An approach for Knoop and Vickers indentations to measure equi-biaxial residual stresses and material properties: A comprehensive comparison", Elsevier BV, (2019), Vol 134, No : 153-164
- "Measuring Nonequibiaxial Residual Stresses and Mechanical Properties Using Knoop Indentation", ASTM International, (2018), Vol 48, No 2: 20170730
- "Residual Stresses Measurement in Hollow Samples Using Contour Method", International Digital Organization for Scientific Information (IDOSI), (2020), Vol 33, No 6:
- "Application of a portable indentation rig with Rockwell indenter to determine mechanical properties and residual stresses on an aluminum plate", SAGE Publications, (2020), Vol 55, No 7-8: 246-257
- "An improvement in data interpretation to estimate residual stresses and mechanical properties using instrumented indentation: A comparison between machine learning and Kriging model", Elsevier BV, (2022), Vol 114, No : 105186
مقالات کنفرانسهای داخلی
- بررسی عددی اثر نحوه حرکت لیزر در ساخت افزایشی ذوب لیزری انتخابی بر تنش پسماند قطعه ارائه شده در بیست و هفتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران (1398)
- به دست آوردن تنش پسماند توسط نفوذ تیز ویکرز ارائه شده در بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران (1398)
- بررسی اثر پهنای ورق در تنش های پسماند شبیه سازی جوش چند پاس ارائه شده در بیست و ششمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران (1397)
- بررسی عددی اثر تنش های پسماند حاصل از عملیات حرارتی کوینچ بر عمر خستگی نمونه تخت ارائه شده در بیست و ششمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران (1397)
- طراحی و ساخت دستگاه پرتابل اندازه گیری تنش پسماند به روش نفوذ ارائه شده در بیست و ششمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران (1397)
- بررسی اصول طراحی دیگ آب گرم سه پاس و تحلیل تنش با شبیه سازی المان محدود ارائه شده در بیست و پنجمین همایش سالانه مهندسی مکانیک (1396)
- مطالعه ی توزیع مجدد تنش پسماند در جوشکاری ترمیمی به روش اجزای محدود ارائه شده در بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک (1393)
- تغییر الگوی برش در اندازه گیری تنش پسماند به روش کانتور ارائه شده در بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک (1393)
- به کارگیری شبکه عصبی و روش المان محدود در بررسی رفتار ترک میان دو ماده مختلف ارائه شده در هفتمین کنفرانس دانشجویی مهندسی مکانیک (1392)
- مطالعه تجربی و عددی اندازه گیری دو مولفه ی تنش پسماند با استفاده از روش شیارزنی(Slitting) ارائه شده در بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک (1392)
- اندازه گیری و تحلیل عددی تنش پسماند جوش بوسیله روش کانتورمتد ارائه شده در نوزدهمین همایش سالانه مهندسی مکانیک (1390)
- مطالعه تجربی اثر تعمیر بر روی توزیع تنشهای پسماند در اتصالات لوله ای ارائه شده در سیزدهمین همایش صنایع دریایی (1390)
- RESIDUAL STRESS MEASUREMENT OF A 316L STAINLESS STEEL QUENCHED CYLINDER USING CONTOUR METHOD ارائه شده در هجدهمین کنفرانس سالانه مهندسی مکانیک (1389)
- اندازهگیری تنشپسماند در اثر جوشکاری با استفاده از روشسوراخکاری مرکزی نموی(ICHD) ارائه شده در هجدهمین کنفرانس سالانه مهندسی مکانیک (1389)