Effect of pretreatment on nickel release from NiTi alloy and microstructure of calcium phosphate coating applied by pulsed current electrochemical deposition

سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 527

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES14_308

تاریخ نمایه سازی: 1 دی 1399

چکیده مقاله:

Despite having the superior mechanical properties, NiTi alloy could not meet all clinical requirementsfor implants. The bio-inert surface of this alloy is one of the reasons for failing its implantation.Releasing the high amount of harmful nickel ions from NiTi alloy is another serious concern causingallergic problems such as inflammation and cells death. Therefore, the surface modification of this alloyis necessary for improving its performance in the biomedical applications. In this work, the surfacemodification of NiTi was carried out by pretreatment and applying the bioactive calcium phosphatecoating. For pretreatment of NiTi alloy, we used two different processes of alkaline treatment in 5 MNaOH solution at 60 °C for 24 hour and heat treatment at 500 ˚C for 30 minute. Moreover, a bioactivecoating of calcium phosphate was applied by pulsed current electrochemical deposition at a constantcurrent density of 15 mA/cm2 and duty cycle of 0.1 on the pretreated surface of NiTi. The results showedthat heat treatment further decreased the nickel release from NiTi into Ringer's solution as compared tothe alkaline treatment. Moreover, wettability of the NiTi sample pretreated with these two processeswas different that affected the microstructure of the top calcium phosphate coating. In fact, the highersurface tension resulted from increasing the wettability caused the formation of porosities with largersize in the microstructure of the coating applied by electrochemical deposition method.

نویسندگان

Leila Fathyunes

Assistant professor, Department of Materials Science and Engineering, University of Bonab, ۵۵۵۱۷۶۱۱۶۷,Bonab, Iran

Seyed Omid Reza Sheykholeslami

Faculty of Materials Engineering, Research Center for Advanced Materials, Sahand University of Technology, ۵۱۳۳۵۱۱۹۹۶, Tabriz, Iran

Vida khalili

Assistant professor, Department of Materials Science and Engineering, University of Bonab, ۵۵۵۱۷۶۱۱۶۷, Bonab, Iran