Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
عنوان مقاله: Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
شناسه ملی مقاله: JR_MPMPJ-2-1_001
منتشر شده در در سال 1392
شناسه ملی مقاله: JR_MPMPJ-2-1_001
منتشر شده در در سال 1392
مشخصات نویسندگان مقاله:
Sajad Rajabi Jalal - M.Sc Graduated, Departmant of Mechanical Engineering, Tarbiat Modarres University
Mohammad Golzar - Assistant Prof., Department of Mechanical Engineering, Tarbiat Modarres University
خلاصه مقاله:
Sajad Rajabi Jalal - M.Sc Graduated, Departmant of Mechanical Engineering, Tarbiat Modarres University
Mohammad Golzar - Assistant Prof., Department of Mechanical Engineering, Tarbiat Modarres University
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of resin, maximum speed could be achieved in the process in such a way by optimizing these parameters the production speed will be improved.
کلمات کلیدی: Injection speed, Darcy’s Law, VARTM
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/1291862/