Mohammad Saleh Barghi Jahromi - Department of Mechanical Engineering, Faculty of Mechanical Engineering, Yazd University, Yazd, Iran.
Vali Kalantar - Department of Mechanical Engineering, Faculty of Mechanical Engineering, Yazd University, Yazd, Iran.
Mohammad Sefid - Department of Mechanical Engineering, Faculty of Mechanical Engineering, Yazd University, Yazd, Iran.
Masoud Iranmanesh - Department of Energy, Institute of Science and High Technology and Environmental Sciences, Graduate University of Advanced Technology, Kerman, Iran.
Hadi Samimi Akhijahani - Department of BioSystems Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran.

Paraffin waxes are widely used as commercial organic heat storage phase changes (PCM) for many applications due to their suitable properties. Significant heat from fusion, nonpoisonous and stable properties, no phase separation, and the phase process result in a small volume change. Meanwhile, they are subject to low thermal conductivity. The thermal conductivity of PCMs can be increased by different techniques such as the use of dispersion of particles or nanomaterials with high conductivity in PCM and the use of metal foams. The use of nanoparticles has such disadvantages as high cost and particle deposition after various cycles. Hence, in this study, some experiments were carried out to investigate the effect of porous media like copper foam and iron wool as the filler instead of nanomaterials on improving the heat conductivity of PCM. The results show that the porous foam increases the heat transfer and during the charging operation, the temperature of the porous plate wall increases continuously at the same rate as the paraffin. At ۲۴۰۰ s, the temperature of pure PCM, iron wool, and copper foam reaches ۶۷.۳, ۷۲.۵, and ۷۳.۲۷℃, respectively. The optimal mode is the one in which the copper absorber plate is connected to the copper foam, thus reducing the charging time by ۶۰۰ s compared to pure PCM and saving ۷۵% of energy. Connecting the copper absorber plate to the iron wool has a good thermal performance and stores ۷۰.۸۳% of energy. Thus, iron wool has an acceptable performance and is suitable for storage systems.

Copper foam and iron wool, Copper absorber plate, Energy Storage, Phase change material