M Safak Tunalioglu - Hitit University, Faculty of Engineering, Department of Mechanical Engineering, Corum, Turkey
B Tuc - Baskent University, Faculty of Engineering, Department of Mechanical Engineering, Ankara, Turkey
M Emin Erdin - Hitit University, Faculty of Engineering, Department of Mechanical Engineering, Corum, Turkey

Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards’ wear formulation was adapted to internal gears and wear behavior in various conditions was determined. Moreover, a fatigue and wear testing apparatus having similar working principle with FZG (Forschungsstelle für Zahnrader und Getreibbau) closed circuit power circulation system was designed and manufactured to experimentally investigate the wear in internal gears. Internal gear-pinion couplesmanufactured from St50 material were coated with various polymeric materials, namely PTFE (polytetrafluoroethylene), MoS2 bonded with polyamide, MoS2 bonded with epoxy in the experimentalstudy. An uncoated internal gear was also investigated to find out the performance of coated gears. Variation of wear depth on tooth profiles of internal gears were determined theoretically and experimentally. Theoretical and experimental studies showed that polymeric coated internal gears have more wear resistance than uncoated ones by means of high lubrication ability and low frictioncoefficient of coating materials. It was also observed that high corrosion resistance of polymeric coatings protected metallic surfaces and decreased corrosive wear

Internal Gear,Rolling-sliding Wear,Wear Testing,Coating Materials,