مقالات بین المللی خارج از کشور
- "Effects of thermal cycles on mechanical properties of an optimized polymer concrete", Elsevier BV, (2011), Vol 25, No 8: 3540-3549
- "Effect of stacking sequence on R-curve behavior of glass/epoxy DCB laminates with 0°//0° crack interface", Elsevier BV, (2011), Vol 529, No : 265-269
- "Calculation of for a multidirectional composite double cantilever beam on two-parametric elastic foundation", Elsevier BV, (2011), Vol 15, No 7: 534-543
- "Simulation of mode I delamination propagation in multidirectional composites with R-curve effects using VCCT method", Elsevier BV, (2012), Vol 65, No : 66-73
- "Interlaminar fracture toughness of unidirectional DCB specimens: A novel theoretical approach", Elsevier BV, (2012), Vol 31, No 1: 68-75
- "Influence of curved delamination front on toughness of multidirectional DCB specimens", Elsevier BV, (2012), Vol 94, No 4: 1359-1365
- "Delamination R-curve as a material property of unidirectional glass/epoxy composites", Elsevier BV, (2012), Vol 34, No : 211-218
- "Free vibration analysis of a non-uniform cantilever Timoshenko beam with multiple concentrated masses using DQEM", Growing Science, (2013), Vol , No : 9-20
- "Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects", Elsevier BV, (2013), Vol 45, No 1: 897-903
- "Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study", Elsevier BV, (2014), Vol 64, No : 308-315
- "Free vibration analysis of a composite beam with single delamination- An improved free and constrained model", Growing Science, (2014), Vol 2, No 4: 313-320
- "Effect of ply stacking sequence on buckling behavior of E-glass/epoxy laminated composites", Elsevier BV, (2014), Vol 89, No : 89-96
- "Effect of initial crack length on the measured bridging law of unidirectional E-glass/epoxy double cantilever beam specimens", Elsevier BV, (2014), Vol 55, No : 605-611
- "Strain gradient shell model for nonlinear vibration analysis of visco-elastically coupled Boron Nitride nano-tube reinforced composite micro-tubes conveying viscous fluid", Elsevier BV, (2015), Vol 96, No : 448-458
- "Multiscale finite element analysis of mode I delamination growth in a fabric composite", Elsevier BV, (2015), Vol 133, No : 157-165
- "Bending analysis of a general cross-ply laminate using 3D elasticity solution and layerwise theory", Springer Science and Business Media LLC, (2015), Vol 7, No 4: 329-340
- "A new finite element method for modeling delamination propagation without additional degrees of freedom", Elsevier BV, (2016), Vol 147, No : 82-98
- "Experimental and theoretical investigation on transverse vibration of delaminated cross-ply composite beams", Elsevier BV, (2016), Vol 115-116, No : 1-11
- "Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens", Elsevier BV, (2016), Vol 86, No : 153-160
- "Axial buckling response of fiber metal laminate circular cylindrical shells", Techno-Press, (2016), Vol 57, No 1: 45-63
- "Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions", International Digital Organization for Scientific Information (IDOSI), (2017), Vol 30, No 10:
- "Moving support technique for delaminatoin detection in laminated composite beams using the first natural frequency", SAGE Publications, (2017), Vol 36, No 15: 1116-1128
- "Dependency of bridging traction of DCB composite specimen on interface fiber angle", Elsevier BV, (2017), Vol 90, No : 22-32
- "Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects", Elsevier BV, (2017), Vol 90, No : 174-181
- "Micromechanics based damage model for predicting compression behavior of polymer concretes", Elsevier BV, (2018), Vol 117, No : 126-136
- "Micromechanical modeling of the mechanical behavior of unidirectional composites – A comparative study", SAGE Publications, (2018), Vol 37, No 16: 1051-1071
- "An analytical approach for local buckling analysis of initially delaminated composite thin-walled columns with open and closed sections", Informa UK Limited, (2016), Vol 27, No 1: 85-105
- "Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites", Elsevier BV, (2019), Vol 175, No : 107147
- "Electric field effect on dynamic analysis of smart porosity-dependent nanocomposite sandwich plate resting on silica aerogel foundation considering carbon nanotubes agglomeration", SAGE Publications, (2019), Vol 30, No 18-19: 2651-2669
- "Mechanical characterization of a flexible epoxy adhesive for the design of hybrid bonded-bolted joints", Elsevier BV, (2019), Vol 79, No : 106048
- "Finite element modeling strategies for 2D and 3D delamination propagation in composite DCB specimens using VCCT, CZM and XFEM approaches", Elsevier BV, (2019), Vol 103, No : 102246
- "Experimental study of collapse mode and crashworthiness response of tempered and annealed aluminum tubes under axial compression", Springer Science and Business Media LLC, (2019), Vol 33, No 5: 2067-2074
- "Delamination R-curve behavior of curved composite laminates", Elsevier BV, (2019), Vol 175, No : 107139
- "Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints", Elsevier BV, (2021), Vol 261, No : 113324
- "Thickness effect study on the crushing characteristics of aluminum and composite tubes: Numerical analysis and multi-objective optimization", Informa UK Limited, (2020), Vol 28, No 24: 2585-2594
- "Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method", SAGE Publications, (2020), Vol 35, No 12: 2435-2452
- "Multi-Objective Optimization of Hybrid Aluminum–Composite Tube Under Axial Crushing", World Scientific Pub Co Pte Lt, (2020), Vol 12, No 04: 2050042
- "An XFEM-VCCT coupled approach for modeling mode I fatigue delamination in composite laminates under high cycle loading", Elsevier BV, (2021), Vol 249, No : 107760
- "The effect of recycled PET bottles on the fracture toughness of polymer concrete", Elsevier BV, (2021), Vol 25, No : 100684
- "A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints", Elsevier BV, (2021), Vol 217, No : 108897
- "Development of Abaqus WCM plugin for progressive failure analysis of type IV composite pressure vessels based on Puck failure criterion", Elsevier BV, (2022), Vol 131, No : 105851
- "Influence of geometric parameters on free vibration behavior of an aluminum honeycomb core sandwich beam using experimentally validated finite element models", SAGE Publications, (2021), Vol 24, No 2: 1449-1469
- "A novel graded auxetic honeycomb core model for sandwich structures with increasing natural frequencies", SAGE Publications, (2021), Vol 24, No 2: 1313-1339
- "Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading", Elsevier BV, (2022), Vol 285, No : 115227
- "Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints", Elsevier BV, (2022), Vol 118, No : 103232
- "A micromechanical damage-healing model for encapsulation-based self-healing polymer composites under tensile loading", Informa UK Limited, (2023), Vol , No : 1-14
- "Optimal design of broadband radar-absorbing composite structures based on different compositions, processing, and geometric parameters", SAGE Publications, (2022), Vol 42, No 9-10: 430-445
مقالات کنفرانسهای داخلی
- Influence of nozzle diameter and temperature on the tensile properties of FDM ۳D printedspecimens produced by homemade PLA filaments ارائه شده در سی و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران و نهمین همایش صنعت نیروگاهی ایران (1402)
- مقایسه تغییر شکل خمشی تابع دما نمونه های چاپ سه بعدی شده از جنس پلی لاکتیک اسید و آکریلونیتریل بوتادین استایرن ارائه شده در نوزدهمین همایش ملی و هشتمین کنفرانس بین المللی مهندسی ساخت و تولید ایران (1401)
- مطالعه اثرات پارامترهای ناحیه ی چسبناک بر رفتار رشد تورق در چندلایه های کامپوزیتی ارائه شده در بیست و هشتمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران (1399)
- مقایسه ایرفویل های مختلف در طراحی پره توربین بادی مقیاس کوچک کامپوزیتی با استفاده از نرم افزار Q-Blade ارائه شده در دومین کنفرانس کاربرد کامپوزیت در صنایع ایران (1399)
- پیش بینی سفتی کششی کامپوزیت تقویت شده با الیاف کوتاه به روش میکرومکانیک ارائه شده در دومین کنفرانس کاربرد کامپوزیت در صنایع ایران (1399)
- حل تحلیلی گذرای سه بعدی میدان دمایی یک اتصال جوشی لب به لب ارائه شده در بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران (1398)
- تعیین چیدمان مناسب در چندلایه های کامپوزیتی تحت بارگذاری درون صفحه ای با استفاده از روش تجزیه مقادیر تکین ارائه شده در بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران (1398)
- تحلیل المان محدود ارتعاشات آزاد یک تیر ساندویچی با هسته لانه زنبوری آلومنیومی با در نظر گرفتن اثرات چسب در هسته ارائه شده در نهمین کنفرانس بین المللی آکوستیک و ارتعاشات (1398)
- مقایسه روش های مختلف مدل سازی المان محدود رشد تورق در چندلایه های کامپوزیتی ارائه شده در بیست و پنجمین همایش سالانه مهندسی مکانیک (1396)
- مدل سازی رشد تورق در نمونه های تیر یک سرگیردار دولبه انحنادار ارائه شده در اولین کنفرانس بینالمللی مکانیک مواد و تجهیزات پیشرفته (1396)
- طراحی یک قید و بست برای بارگذاری دو محوره نمونه های کامپوزیتی توسط دستگاه کشش تک محوره ارائه شده در سیزدهمین کنفرانس مهندسی ساخت و تولید ایران (1395)
- پیش بینی شروع و رشد مود دوم تورق در کامپوزیت های تک جهته به کمک المان های چسبناک ارائه شده در بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک (1393)
- بررسی نیمه تحلیلی و عددی انتقال حرارت در پوسته مخروطی ناقص ارائه شده در دومین کنفرانس بین المللی دستاوردهای نوین در علوم مهندسی و پایه (1393)
- حل دقیق انتقال حرارت گذرا درلوله های انتقال دهنده نفت و گاز ارائه شده در نخستین کنفرانس بین المللی نفت، گاز و پتروشیمی با رویکرد توسعه پایدار (ارتباط دانشگاه با صنعت) (1393)
- تعیین تجربی چقرمگی شکست مد I بینلایهای در چندلایههای کامپوزیتی تکجهته ارائه شده در نوزدهمین همایش سالانه مهندسی مکانیک (1390)
- طراحی و ساخت صفحات تصفیه آب آشامیدنی با استفاده از بتن پلیمری ارائه شده در اولین همایش بین المللی بتن های ناتراوا - مخازن ذخیره آب شرب (1390)
- مدلی جدید برای تعیین چقرمگی شکست مودI تورق در قطعه DCB با استفاده از مدل تیرتیموشنکو برروی بستر الاستیک دو پارامتری ارائه شده در هجدهمین کنفرانس سالانه مهندسی مکانیک (1389)
- تعیین چقرمگی شکست بین لایه ای درقطعه DCB چندجهته در مود I با استفاده از روش معادلسازی لایه ها ارائه شده در دهمین همایش انجمن هوافضای ایران (1389)
- ارائه الگوی بازنمایی فعالیت های یک ماهواره در نرم افزار سیستم هوشمند ارائه شده در هشتمین کنفرانس انجمن هوافضای ایران (1388)
مقالات ژورنالهای تخصصی داخلی
- مطالعه تجربی تاثیر پارامترهای مختلف ساخت بر خواص کششی نمونههای PLA چاپشده به روش مدلسازی رسوب ذوبشده منتشر شده در فصلنامه علوم و فناوری کامپوزیت (1399)
- بازسازی تصاویر حرارتی و به کارگیری روش خوشه بندی K جهت عیب یابی قطعات پلیمری ساخت افزایشی منتشر شده در فناوری آزمونهای غیرمخرب (1399)
- به کارگیری روش های پردازش تصاویر حرارتی به منظور بهبود شناسایی عیوب قطعات تولیدشده به روش ساخت افزایشی منتشر شده در فناوری آزمونهای غیرمخرب (1399)
- حل دقیق براى معادلات فرکانسى ارتعاشات آزاد شعاعى و عرضى یک ورق دایره اى با شرایط مرزى مختلف منتشر شده در فصلنامه مدل سازی در مهندسی (1396)
- تاثیر محرک های مختلف لبه بر رفتار تصادم یک جعبه تصادف کامپوزیتی منتشر شده در فصلنامه علوم و فناوری کامپوزیت (1396)
- بررسی تئوری و تجربی تاثیرات تورق بر پارامترهای ارتعاشی تیر کامپوزیتی متعامد متقارن منتشر شده در فصلنامه علوم و فناوری کامپوزیت (1395)
- حل تحلیلی ارتعاشات آزاد نانو ورق دولایه تقویت شده با نانولوله های کربنی مدرج تابعی واقع در بستر الاستیک منتشر شده در فصلنامه علوم و فناوری کامپوزیت (1394)
- تاثیر چیدمان لایه ها بر مود دوم نرخ رهایی انرژی کرنشی در قطعه ENF کامپوزیتی منتشر شده در دوفصلنامه روشهای عددی در مهندسی (1393)