مقالات بین المللی خارج از کشور
- "Foam-Core Effect on the Integrity of Tailplane Leading Edge During Bird-Strike Event", American Institute of Aeronautics and Astronautics (AIAA), (2011), Vol 48, No 6: 2080-2089
- "Effect of Impact Orientation on Bird Strike Analysis", MAFTREE, (2011), Vol 3, No 3:
- "Effect of bird geometry and orientation on bird-target impact analysis using SPH method", Informa UK Limited, (2012), Vol 17, No 4: 445-459
- "A new bird model and the effect of bird geometry in impacts from various orientations", Elsevier BV, (2013), Vol 28, No 1: 9-20
- "On the difference of pressure readings from the numerical, experimental and theoretical results in different bird strike studies", Elsevier BV, (2014), Vol 32, No 1: 260-266
- "New Bird Model for Simulation of Bird Strike on Various Layups Used in Transparent Components of Rotorcrafts", American Society of Civil Engineers (ASCE), (2014), Vol 27, No 1: 76-85
- "Bird strike analysis on a typical helicopter windshield with different lay-ups", Springer Science and Business Media LLC, (2014), Vol 28, No 4: 1381-1392
- "Axial crushing behavior and energy absorption efficiency of corrugated tubes", Elsevier BV, (2014), Vol 54, No : 1028-1038
- "Investigation of debonding propagation in aluminum/composite joints under fatigue loading", Informa UK Limited, (2014), Vol 29, No 2: 59-73
- "Effect of Window Geometry on Strength of Shaft Part of Femur Bone", Periodica Polytechnica Budapest University of Technology and Economics, (2015), Vol 59, No 2: 81-87
- "Effect of material type, stacking sequence and impact location on the pedestrian head injury in collisions", Elsevier BV, (2015), Vol 97, No : 130-139
- "Bird Strike", Elsevier, (2016), Vol , No :
- "Programming the shape-shifting of flat soft matter: from self-rolling/self-twisting materials to self-folding origami", Royal Society of Chemistry (RSC), (2016), Vol 3, No 6: 536-547
- "Numerical and experimental study of mechanical response of aluminum foams under compressive loading using CT data", Polish Society of Theoretical and Applied Mechanics, (2016), Vol , No : 1357
- "Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell", Elsevier BV, (2016), Vol 53, No : 272-294
- "Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models", Elsevier BV, (2016), Vol 60, No : 163-183
- "Mechanical Properties of Additively Manufactured Thick Honeycombs", MDPI AG, (2016), Vol 9, No 8: 613
- "Mechanical properties of additively manufactured octagonal honeycombs", Elsevier BV, (2016), Vol 69, No : 1307-1317
- "Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells", Elsevier BV, (2016), Vol 106, No : 19-38
- "Finite element analysis of an aluminum airplane stabilizer against birdstrike", Springer Science and Business Media LLC, (2015), Vol 38, No 2: 317-326
- "Effect of Using an Inner Plate between Two Faces of a Sandwich Structure in Resistance to Bird-Strike Impact", American Society of Civil Engineers (ASCE), (2016), Vol 29, No 1:
- "Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials", Elsevier BV, (2016), Vol 89, No : 9-20
- "Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials", Elsevier BV, (2016), Vol 84, No : 67-79
- "Analytical relationships for prediction of the mechanical properties of additively manufactured porous biomaterials", Wiley, (2016), Vol 104, No 12: 3164-3174
- "A micromechanical approach to numerical modeling of yielding of open-cell porous structures under compressive loads", Polish Society of Theoretical and Applied Mechanics, (2016), Vol , No : 769
- "Rational design of soft mechanical metamaterials: Independent tailoring of elastic properties with randomness", AIP Publishing, (2017), Vol 111, No 5: 051903
- "How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?", Elsevier BV, (2017), Vol 65, No : 831-841
- "Fatigue crack propagation in additively manufactured porous biomaterials", Elsevier BV, (2017), Vol 76, No : 457-463
- "Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials", Elsevier BV, (2017), Vol 76, No : 406-416
- "Effects of laser processing parameters on the mechanical properties, topology, and microstructure of additively manufactured porous metallic biomaterials: A vector-based approach", Elsevier BV, (2017), Vol 134, No : 234-243
- "Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells", Elsevier BV, (2017), Vol 46, No : 408-422
- "Additively manufactured metallic pentamode meta-materials", AIP Publishing, (2017), Vol 110, No 9: 091905
- "CT-Based Micro-Mechanical Approach to Predict Response of Closed-Cell Porous Biomaterials to Low-Velocity Impact", MDPI AG, (2018), Vol 4, No 3: 49
- "Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials", Elsevier BV, (2018), Vol 113, No : 416-427
- "Low-velocity impact behaviour of open-cell foams", Polish Society of Theoretical and Applied Mechanics, (2018), Vol , No : 939
- "Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials", Elsevier BV, (2018), Vol 79, No : 254-263
- "Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type", Elsevier BV, (2018), Vol 65, No : 292-304
- "Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys", Wiley, (2018), Vol 106, No 7: 1798-1811
- "Comparison of elastic properties of open-cell metallic biomaterials with different unit cell types", Wiley, (2017), Vol 106, No 1: 386-398
- "Action-at-a-distance metamaterials: Distributed local actuation through far-field global forces", AIP Publishing, (2018), Vol 6, No 3: 036101
- "Semianalytical Geometry-Property Relationships for Some Generalized Classes of Pentamodelike Additively Manufactured Mechanical Metamaterials", American Physical Society (APS), (2019), Vol 11, No 3:
- "Nonlinear stability analysis of piecewise actuated piezoelectric microstructures", Elsevier BV, (2019), Vol 160, No : 200-208
- "3D Printing On-Water Sports Boards with Bio-Inspired Core Designs", MDPI AG, (2020), Vol 12, No 1: 250
- "Pneumatically-Actuated Acoustic Metamaterials Based on Helmholtz Resonators", MDPI AG, (2020), Vol 13, No 6: 1456
- "Development of porous implants with non-uniform mechanical properties distribution based on CT images", Elsevier BV, (2020), Vol 83, No : 801-823
- "Hybrid anisotropic pentamode mechanical metamaterial produced by additive manufacturing technique", AIP Publishing, (2020), Vol 117, No 6: 061901
- "Analytical relationships for yield stress of five mechanical meta-biomaterials", Informa UK Limited, (2020), Vol 50, No 10: 3452-3474
- "Femur Auxetic Meta-Implants with Tuned Micromotion Distribution", MDPI AG, (2020), Vol 14, No 1: 114
- "Improving the Accuracy of Analytical Relationships for Mechanical Properties of Permeable Metamaterials", MDPI AG, (2021), Vol 11, No 3: 1332
- "Nonlinear Finite Element Modelling of Thermo-Visco-Plastic Styrene and Polyurethane Shape Memory Polymer Foams", MDPI AG, (2021), Vol 10, No 3: 46
- "Fatigue Life Improvement of Cracked Aluminum 6061-T6 Plates Repaired by Composite Patches", MDPI AG, (2021), Vol 14, No 6: 1421
- "3D gradient auxetic soft mechanical metamaterials fabricated by additive manufacturing", AIP Publishing, (2021), Vol 118, No 14: 141904
- "Fatigue Modeling and Numerical Analysis of Re-Filling Probe Hole of Friction Stir Spot Welded Joints in Aluminum Alloys", MDPI AG, (2021), Vol 14, No 9: 2171
- "Dynamic crushing behavior of closed-cell aluminum foams based on different space-filling unit cells", Springer Science and Business Media LLC, (2021), Vol 21, No 3:
- "Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing", IOP Publishing, (2021), Vol 30, No 10: 105006
- "Effect of Impact and Bearing Parameters on Bird Strike with Aero-Engine Fan Blades", MDPI AG, (2021), Vol 12, No 1: 7
- "3D Printing Habitats on Mars Using Martian Regolith Simulant", Open Engineering Inc, (2022), Vol , No :
- "Acoustic Metamaterials and Acoustic Foams: Recent Advances", MDPI AG, (2022), Vol 12, No 6: 3096
- "Sandwich structures with repairable cores based on truncated cube cells", Elsevier BV, (2022), Vol 243, No : 110124
- "Shape-memory polymer metamaterials based on triply periodic minimal surfaces", Elsevier BV, (2022), Vol 96, No : 104676
- "PREFACE: NOVELTIES AND FRONTIERS IN POROUS MEDIA: SPECIAL FOCUS ON ANALYTICAL MODELS (PART ONE)", Begell House, (2022), Vol 25, No 7: v-vii
- "PREFACE: NOVELTIES AND FRONTIERS IN POROUS MEDIA: SPECIAL FOCUS ON ANALYTICAL MODELS (PART TWO)", Begell House, (2022), Vol 25, No 8: v-vii
- "Numerical and Experimental Study of Quasi-Static Loading of Aluminum Closed-Cell Foams Using Weaire–Phelan and Kelvin Tessellations", Springer Science and Business Media LLC, (2022), Vol 142, No 1-2: 229-248
- "Editorial to the Special Issue on Advanced Micro/Nanoscale Porous Materials for Novel Applications: Answering to Future Needs", Springer Science and Business Media LLC, (2022), Vol 142, No 1-2: 1-4
- "Dynamic thermal buckling of spherical porous shells", Elsevier BV, (2022), Vol 172, No : 108737
- "Analytical relationships for 2D Re-entrant auxetic metamaterials: An application to 3D printing flexible implants", Elsevier BV, (2023), Vol 143, No : 105938
- "Thermomechanical behavior of lattice structures: An analytical, numerical, and experimental study", Informa UK Limited, (2023), Vol , No : 1-24
- "The effect of auxeticity on the vibration of conical sandwich shells with ring support under various boundary conditions", Elsevier BV, (2023), Vol 152, No : 130-147
- "Gradient Origami Metamaterials for Programming Out‐of‐Plane Curvatures", Wiley, (2023), Vol , No : 2201838
- "Delamination link-ups in composite laminates due to multiple hail impacts", Elsevier BV, (2023), Vol 294, No : 116729
- "3D Printing of Habitats on Mars: Effects of Low Temperature and Pressure", MDPI AG, (2023), Vol 16, No 14: 5175
مقالات کنفرانسهای داخلی
- Optimized Stiffened Plates as Equivalent Structures for Sandwich Panels Under Ice Impact ارائه شده در سی و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران و نهمین همایش صنعت نیروگاهی ایران (1402)
- مطالعه رفتار مکانیکی سازه سلولی آگزتیک توری مربعی ارائه شده در سی و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران و نهمین همایش صنعت نیروگاهی ایران (1402)
- Effect of interlayer dry area extent and interlaminar delamination on the tensile strength of composite plates manufactured by vacuum infusionprocess ارائه شده در هشتمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد (1401)
- The effect of the presence of bubbles inside resin on the tensile strength of composites manufactured by vacuum infusion process ارائه شده در هشتمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد (1401)
- شبیه سازی و ساخت لوله اکزوتیکی پلیمری به روش ساخت افزایشی ارائه شده در نوزدهمین همایش ملی و هشتمین کنفرانس بین المللی مهندسی ساخت و تولید ایران (1401)
- Behavior of Thin-Walled Structures under Impact Load Using LS-DYNA Codes ارائه شده در بیست و پنجمین همایش سالانه مهندسی مکانیک (1396)
- بررسی پارامترهای موثر بر رفتار مکانیکی فوم فلزی سلول باز تحت بارگذاری های فشاری شبه استاتیکی و دینامیکی ارائه شده در اولین کنفرانس سالانه ملی مهندسی مکانیک و راهکارهای صنعتی (1394)
- بررسی تئوریک برخورد پرنده با سطوح صلب ارائه شده در بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک (1392)
- Cost Optimization of Elastic Energy Absorbers in Car Bumper for Impact Application using Kuhn-Tucker, SLP, CSD and PLBA algorithms ارائه شده در بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک (1392)
مقالات ژورنالهای تخصصی داخلی
- بررسی اثر مدل ماده، معادله حالت و چگالی شبکه در نتایج حاصل از شبیه سازی برخورد پرنده منتشر شده در مجله مهندسی مکانیک دانشگاه تبریز (1391)
- هدایتی رضا، ضیایی راد سعید. مقایسه روشهای حل عددی در برخورد قائم و مورب پرنده. مهندسی مکانیک مدرس. ۱۳۹۰; ۱۱ (۲) :۱۳-۲۵ (1390)
تالیفات
- کتاب Bird strike: An experimental, theoretical and numerical investigation (Elsevier (Imprint: Woodhead Publishing)) - 2015 - انگلیسی
- کتاب تئوری و مسایل مکانیک محیط های پیوسته (جاودان خرد) - 1393 - فارسی
تحصیلات تخصصی
- دکتری تخصصی مهندسی مکانیک دانشگاه صنعتی امیرکبیر1390-1395