Hybrid method for studying the effect of the material change on the blade vibration behavior
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 359
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_TAVA-5-2_001
تاریخ نمایه سازی: 16 تیر 1399
چکیده مقاله:
To increase the production efficiency of a typical turbine blade, it is necessary to change its material and hence its production technology. In this respect and in order to make sure that newmaterial will not bring about the blade resonant vibrations, the common practice is to use the Campbell diagram approach. This approach only indicates the potential dangers for blade forced vibration. The purpose of this paper is to demonstrate the efficiency of a proposed hybrid procedure for the development of a reliable Campbell diagram, using an updated finite elementmodel and a simplified test setup.
کلیدواژه ها:
نویسندگان
Ali Salehzadeh Nobari
Professor, Aerospace Department, Amirkabir University of Technology, Tehran, Iran
Kamal Jahani
Associate Professor, Mechanical Engineering Department, University of Tabriz, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :