Analysis of Fluid Flow and Gas Pressure Drop in a Rotating Packed Bed using CFD
محل انتشار: سومین کنفرانس ملی کاربرد CFD در صنایع شیمیایی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,442
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCFDACCI03_045
تاریخ نمایه سازی: 17 دی 1389
چکیده مقاله:
Three-dimensional steady-state turbulent rotating flow of air in a dry rotating packed bed (RPB) with three gas feed designs were investigated using CFD. The CFD predictions were compared with the overall dry pressure drop measurements for a given RPB design. The results showed that the design of the gas entrance determines the flow circulation in the RPB casing; hence, different velocity distributions arise depending on the RPB geometry. Also, simulation results showed that for the tangential gas inlet system, maldistribution of gas flow nearby the packing-housing junction is less than other designs. Almost the same values of the total pressure drop achieved for three RPB feed designs. Generally, good agreement between the measured pressure drops and CFD predictions achieved and the dependences with respect to RPM captured well.
کلیدواژه ها:
نویسندگان
M Hamedi
MSc Student of Chemical Engineering, Isfahan University of Technology
M Hashshenas Fard
Assistant Professor of Chemical Engineering, Isfahan University of Technology
N Nast Esfahany
Associate Professor of Chemical Engineering, Isfahan University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :