Wear performance of a Fe-based metallic glass reinforced Al matrix composite
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 231
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ELEMECHCONF06_088
تاریخ نمایه سازی: 22 آذر 1399
چکیده مقاله:
In this study, bulk composites contain different amount of metallic glass particles produced. Fe-based metallic glass (FMG) particles were mixed with pure Al particles and consolidated through the spark plasma sintering (SPS) method. The mechanical and wear properties of the composite were then investigated. The effects of the FMG content on the hardness, coefficient of friction and wear rates were evaluated.The experimental results showed that the hardness of composites increased with increasing the volume fraction of FMG particles. Also, formation of mechanically mixed layer during the wear test resulted in reduction of coefficient of friction. The composite contains 10 vol.% of reinforcing particles showed the maximum wear rate among all samples.
کلیدواژه ها:
نویسندگان
M. R. Rezaei
Assistant Professor, School of Engineering, Damghan University, Damghan, P. O. ۳۶۷۱۶۴۱۱۶۷, Iran,
A. Albooyeh
Assistant Professor, School of Engineering, Damghan University, Damghan, P. O. ۳۶۷۱۶۴۱۱۶۷, Iran,
M. Shayestefar
Bachelor of Science, School of Engineering, Damghan University, Damghan, P. O. ۳۶۷۱۶۴۱۱۶۷, Iran,
H. Shiraghaei
Bachelor of Science, School of Engineering, Damghan University, Damghan, P. O. ۳۶۷۱۶۴۱۱۶۷, Iran,