Topological and structural review of EV fast chargers

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 207

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_EECS-1-2_002

تاریخ نمایه سازی: 16 بهمن 1399

چکیده مقاله:

The increasing growth of the technology and industry of electric propulsion, and consequently the growth of the industry of electric energy storage systems, including batteries, have raised challenges such as optimizing the charging process and storage of electric energy. One of the important factors in optimizing the charging process is reducing the time interval. Hence, today, topologies such as fast charging and stations equipped with this topologies are expanding. Quick charging topologies reduce the length of the charging process by optimizing the electric charge circuit and optimizing the design of switching elements and its control system. This paper first examines the electric vehicle charging system in terms of the standards that classify the input voltage level as well as the technologies that increase the flexibility and efficiency of the electric vehicle charging system. Technologies such as unidirectional and bi-directional charging system, inductive and conductive charging system, integrated and non-integrated systems are presented and discussed in this article. In the second step, these systems are transformed into switching components and features such as the possibility of development with renewable energy production systems, the possibility of injecting power from the electric vehicle energy storage system into the power grid to provide part of the power required at peak demand and also The complexity and multiplicity of key elements have been examined and compared.

نویسندگان

- -

Faculty of Electrical and Computer Engineering, Shahid Beheshti University, Evin, Tehran, Iran

- -

Faculty of Electrical and Computer Engineering, Shahid Beheshti University, Evin, Tehran, Iran

- -

Faculty of Electrical and Computer Engineering, Shahid Beheshti University, Evin, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • [1] Rajashekara K. (1994) “History of electric vehicles in general ...
  • [2] Jia YingYong, Vigna K.Ramachandaramurthy, Kang MiaoTan etal. (2015). “Bi-directional ...
  • [3] Mohsen Ahmadi, N. Mithulananthan and Rahul Sharma. (2016). “A ...
  • [4] Sovacool, Benjamin K. (2010). “A transition to plug-in hybrid ...
  • [5] M. Nicholas, G. Tal, and J. Woodjack. (2013). “California ...
  • [6] C. H. Dharmakeerthi, N. Mithulananthan, and T. K. Saha. ...
  • [7] R. C. Green, W. Lingfeng, and M. Alam. (2010). ...
  • [8] Murat Yilmaz and Philip T. Krein, Fellow. “Review of ...
  • [9] L. Solero. (2001). “Nonconventional on-board charger for electric vehicle ...
  • [10] S. Lacroix, E. Laboure, and M. Hilairet. (2010). “An ...
  • [11] L. De-Sousa and B. Bouchez. (2010). “Combined electric device ...
  • [12] Nguyen TD, LiS, LiW, MiCC. (2014). “Feasibility study on ...
  • [13] “EV charging infrastructure deployment guidelines” BC. Electric Transportation Engineering ...
  • [14] “Installation guide for electric vehicle supply equipment.” Massachusetts Di-vision ...
  • [15] SAE Electric Vehicle and Plug-in Hybrid Electric Vehicle Conductive ...
  • [16] Braunl T.EV Charging Standards 2012: p 1–5. ...
  • [17] Hussain Shareef a,n, Md.MainulIslam b, AzahMohamed b.(2016). “A review ...
  • [18] Arancibia, Arnaldo, and Kai Strunz. (2012). “Modeling of an ...
  • [19] Reed, Gregory F., et al. (2012). “Advancements in medium ...
  • [20] S. Rivera, B. Wu, S. Kouro, V. Yaramasu and ...
  • [21] Aggeler, Daniel. (2010). “Ultra-fast DC-charge infrastructures for Evmobility and ...
  • [22] J. Y. Yong, V. K. Ramachandaramurthy, K. M. Tan, ...
  • [23] M. Ahmadi, N. Mithulananthan and R. Sharma. (2015). “Dynamic ...
  • [24] S. Bai, Y. Du and S. Lukic. (2010). “Optimum ...
  • [25] Bai, Sanzhong, and Srdjan M. Lukic. (2013). “Unified active ...
  • [26] Joy, T. P., Kannan Thirugnanam, and Pranaw Kumar. (2013). ...
  • [27] Wang, Shuo, Russell Crosier, and Yongbin Chu. (2012). “Investigating ...
  • [28] Crosier, Russell, Shuo Wang, and Mohamed Jamshidi. (2012). “A ...
  • [29] 2012-Crosier- Crosier, Russell, Shuo Wang, and Yongbin Chu. (2012). ...
  • [30] Crosier, Russell, and Shuo Wang. (2013). “DQ-frame modeling of ...
  • [31] Vasiladiotis, Michail, Alfred Rufer, and Antoine Béguin. (2012). “Modular ...
  • [32] Vasiladiotis, Michail, and Alfred Rufer. (2015). “A Modular Multiport ...
  • [33] Waltrich, Gierri, Jorge Duarte, and Marcel AM Hendrix. (2012). ...
  • [34] B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, ...
  • [35] B. Kedjar, H. Y. Kanaan, and K. Al-Haddad. (2014). ...
  • [36] D. S. Wijeratne and G. Moschopoulos. (2014). “A Novel ...
  • [37] I. Subotic, E. Levi,M. Jones, andD.Graovac. (2013). “On-board integrated ...
  • [38] G. Pellegrino, E. Armando, and P. Guglielmi. (2010). “An ...
  • [39] L. Tang and G. J. Su. (2009). “A low-cost, ...
  • [40] Ruoyun Shi, Sepehr Semsar and Peter W. Lehn. (2018). ...
  • [41] Different fast charging methods and topologies for EV charging ...
  • [42]  D. Aggeler, F. Canales, H. Zelaya - De La ...
  • [43] Longcheng Tan, Bin Wu, Venkata Yaramasu, Sebastian Rivera and ...
  • نمایش کامل مراجع