A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes
محل انتشار: مجله شکل دهی مواد، دوره: 7، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 215
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMF-7-1_005
تاریخ نمایه سازی: 18 فروردین 1400
چکیده مقاله:
In this paper, the laser bending process of a circular tube made of mild steel has been investigated experimentally. For this purpose, the effects of the irradiating length and the number of irradiating passes on the main bending angle of a laser bent tube are studied. In addition, the main defects of the laser tube bending process such as lateral bending angle, ovality and thickness variation are examined. Hence the effects of irradiating length and number of irradiating passes on the lateral bending angle, ovality and thickness variation of a laser bent tube are investigated. The results show that with an increase in the irradiating length, the main bending angle, the ovality percentage and the thickness variation increase and also the lateral bending angle will decrease. In addition, it is concluded that with an increase in the number of irradiating passes, main and lateral bending angles, ovality percentage and thickness variation increase.
کلیدواژه ها:
نویسندگان
M. Safari
Department of Mechanical Engineering, Arak University of Technology, Arak, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :