Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 33، شماره: 11
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 186
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-33-11_016
تاریخ نمایه سازی: 6 اردیبهشت 1400
چکیده مقاله:
Press automotive components manufacturer in Indonesia with the Overall Equipment Effectiveness (OEE) achievement was ۶۰.۷%, it was below than world company level as mention in Japanese Institute of Plant Maintenance (JIPM)- Total Productive Maintenance (TPM) standard, the biggest OEE components problem was availability value that achieved ۶۳.۳%, then the biggest availability problem was dies preparation time. Using TPM method and Plan-Do-Check-Act (PDCA) cycle with Pareto chart and Fishbone diagram, we succeeded to improve dies setting time within one months. We could increase the availability value from ۶۳.۳% became ۶۷.۸% and finally OEE value increased from ۶۰.۷% became ۶۵.۳%.
کلیدواژه ها:
نویسندگان
C. Jaqin
Industrial Engineering Program, Mercu Buana University, Jakarta, Indonesia
A. Rozak
Industrial Engineering Program, Mercu Buana University, Jakarta, Indonesia
H. Hardi Purba
Industrial Engineering Program, Mercu Buana University, Jakarta, Indonesia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :