Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 34، شماره: 1
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 219
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-34-1_001
تاریخ نمایه سازی: 6 اردیبهشت 1400
چکیده مقاله:
Nano bioactive glasses are known as suitable alternatives to repair the damaged bone tissues. In this research, novel sol-gel derived bioactive glass composites were synthesized through a reduction in the common weight percent of SiO۲ substituted by ۱۵ wt% of titanium dioxide nanotubes (TNTs) at two different steps by the synthetic procedure. The morphology, crystalline structure, and functional groups of the composites were evaluated through scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analyses. Based on the SEM images, the step in which TNTs were added to the solution completely changed the morphology of the composite. Bioactivity tests were carried out by soaking the samples in the simulated body fluid (SBF) at the intervals of ۱۴ and ۲۸ days followed by the investigation of hydroxyapatite (HA) layer formation on the surface of the samples. According to XRD peaks at ۲-theta angle of around ۳۱ and ۴۰ degrees, it was found that the presence of titanium dioxide nanotubes improved bioactivity after ۱۴ days of immersion and both ۵۸S-TNT composites were more bioactive than ۵۸S bioglass, while ۵۸S bioactive glass possessed more intense peaks of HA after ۲۸ days of immersion in SBF. Furthermore, the drug loading characteristic of the prepared composites was examined and the results showed that the addition of nanotubes improved the drug loading performance of bioactive composites containing TNTs up to ۷۰% compared to the ۵۸S bioglass with ۳۷% drug loading.
کلیدواژه ها:
نویسندگان
O. Saneei Siavashy
Department of Chemical Engineering, University of Science and Technology of Mazandaran, Behshahr, Iran
N. Nabian
Department of Chemical Engineering, University of Science and Technology of Mazandaran, Behshahr, Iran
S. M. Rabiee
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :