Vibration characteristics of tractor seat cushion materials
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 240
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IAR-39-1_011
تاریخ نمایه سازی: 6 اردیبهشت 1400
چکیده مقاله:
Operators of agricultural machinery are exposed to an extensive range of indirect vibrations through the seats, which gradually causes chronic damages. One of the ways to reduce the vibrations imposed on the operators is to use appropriate materials in tractor seat cushion. The present study was carried out in order to select appropriate foam or sponge and investigate different factors in reducing vibrations imposed on operator’s body so as to promote drivers health and enhance their working efficiency. Vibration experiments were performed at different accelerations on foam and sponge materials at different thicknesses and densities for different occupant masses, and the input and output acceleration signals were recorded and analyzed. Using the analysis of variance, analysis of the mean squares of the input and output acceleration, the type of material used in the seat cushion and the effect of different factors on them were investigated. The results showed that in reducing vibrations, sponge for mass of ۹۰ kg and more and foam for mass of ۷۵ kg and less were more efficient. The sponge was also suitable for acceleration of excitation above ۶ ms-۲and foam for acceleration of excitation above ۳ ms-۲ and below. Therefore, according to the working conditions of agricultural machines and anthropometric characteristics of Iranian drivers and the appropriate suitable thickness of the seat cushion (۶-۸ cm), it is recommended that their seat cushion be made of a combination of foam and sponge with high density and thickness of ۸ cm.
کلیدواژه ها:
driver polyurethane foam seat cushion sponge whole ، body vibration
نویسندگان
Neda Asgarifar
Mechanical Engineering of Biosystems, Shahrekord University, Iran
Ali Maleki
Department of Mechanical Engineering of Biosystems,faculty of Agriculture, of Shahrekord University , Iran
Majid Lashgari
Mechanical Engineering of Biosystems, Arak University, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :