Vibration Analysis of ۲-PR(Pa)U- ۲-PR(Pa)R New Parallel Mechanism

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 221

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-11-2_005

تاریخ نمایه سازی: 13 اردیبهشت 1400

چکیده مقاله:

Parallel kinematic machines, are closed loop structures which have more accuracy, stiffness and ability to withstand high loads. In this paper the vibration equations of the new parallel mechanism, that has higher stiffness because of parallelogram system and fixed length pods, have been derived by analytical approach. Whereas the proposed mechanism is applied as a machine tools, its vibrational behavior investigation has key impact factor. All the kinematic chains of the mechanism have been taken into consideration to achieve the coupled system of equations. To extract mechanism natural frequencies, modal analysis is carried out using three methods including analytical, finite element (FEM) and experimental method on parallel mechanism which has four degrees of freedom including three linear motion along the x, y and z axes and a rotary motion about x axis. Finally the natural frequencies and mode shapes obtained from analytical, experimental and FEM were compared. It is worth noting that all the frequencies obtained from three methods had little differences.

نویسندگان

Mehran Mahboubkhah

Department of Mechanical Engineering, University of Tabriz, Iran

Sajjad Pakzad

Department of Mechanical Engineering, University of Tabriz, Iran

Morteza Homayoun Sadeghi

Department of Mechanical Engineering, University of Tabriz, Iran

Mir Mohammad Ettefagh

Department of Mechanical Engineering, University of Tabriz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Tsai, L., “Robot Analysis: The Mechanics of Serial and Parallel ...
  • Merlet, J. P., “Parallel Robots”, Kluwer academic publishers, 2001 ...
  • Wu, J., Yin, Z., “A Novel 4-DOF Parallel Manipulator H4”, ...
  • Altintas, Y., “Manufacturing Automation”, London, UK: Cambridge University Press, 2000 ...
  • Schmitz, T. L., Smith, K. S., “Machining Dynamics: Frequency Response ...
  • Budak, E., “Analytical Models for High Performance Milling. Part I: ...
  • Budak, E., “Analytical Models for High Performance Milling. Part II: ...
  • Pedrammehr, S., Farrokhi, H., Rajab, A. K. S., Pakzad, S., ...
  • Patwari, A. U., Faris, W. F., Nurul Amin, A. K. ...
  • Wu, Z., Xu, C., Zhang, J., Yu, D., and Feng, ...
  • Le Lan, J. V., Marty, A., and Debongnie, J. F., ...
  • Budak, E., Tunç, L. T., Alan, S., and Özgüven, H. ...
  • Mahdavinejad, R., “Finite Element Analysis of Machine and Workpiece Instability ...
  • Doman, D. A., Warkentin, A., and Bauer, R., “Finite Element ...
  • Yuan, S. X., Wen, X. L., Zhang, Y. M., “Modal ...
  • Sahu, S., Choudhury, B. B., and Biswal, B. B., “A ...
  • Zhang, X., Huang, R., Yao, S. and Dong, X., “Finite ...
  • Flint, E., Anderson, E., “Multi-Degree of Freedom Parallel Actuation System ...
  • Mahboubkhah, M., Nategh, M., and Khadem, S., “A Comprehensive Study ...
  • Mahboubkhah, M., Nategh, M., and Khadem, S., “Vibration Analysis of ...
  • Pedrammehr, S., Mahboubkhah, M., and Khani, N., “Natural Frequencies and ...
  • Pedrammehr, S., Mahboubkhah, M., Qazani, M. R. C., Rahmani, A., ...
  • Law, M., Ihlenfeldt, S., Wabner, M., Altintas, Y., and Neugebauer, ...
  • Sharifnia, M., Akbarzadeh, A., “Approximate Analytical Solution for Vibration of ...
  • Pedrammehr, S., Danaei, B., Abdi, H., Masule, M. T. and ...
  • Zheng, K., Zhang, Q., “Comprehensive Analysis of the Position Error ...
  • Chen, Z. S., Liu, M., Kong, M. X., and Ji, ...
  • Guo, S., He, Y., Shi, L., Pan, S., and Tang, ...
  • نمایش کامل مراجع