Investigation of The Effects of Process Parameters on The Welding Line Movement in Deep Drawing of Tailor Welded Blanks
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 177
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-9-2_006
تاریخ نمایه سازی: 18 اردیبهشت 1400
چکیده مقاله:
In this paper, the deep drawing process of tailor welded blanks is simulated using the finite element modelling and verified using the experimental results available in the literature. Then the effect of die and material properties on the welding line movement is investigated. It is seen that the most effective material parameters on weld line movement are different between sheet metal thicknesses and strength coefficient of two welded sheets. Also it is seen that the most effective die parameter on weld line movement is the friction coefficient between punch and blank. Finite element simulations show that in the wall section of the drawn cup, the welding line moves toward the material with smaller thickness and lower strength coefficient while in the bottom of the drawn cup, the welding line moves toward the material with larger thickness, and higher strength coefficient. Based on the results, increasing the friction coefficient between blank and die, decreases the welding line movement considerably.
کلیدواژه ها:
نویسندگان
Ali Fazli
Department of Mechanical Engineering, Faculty of Engineering and Technology, Imam Khomeini International University, Qazvin, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :