On Applicability of Some Indirect Tests for Estimation of Tensile Strength of Anisotropic Rocks
محل انتشار: مجله معدن و محیط زیست، دوره: 11، شماره: 3
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 173
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-11-3_005
تاریخ نمایه سازی: 21 اردیبهشت 1400
چکیده مقاله:
The tensile strength of rocks plays a noteworthy role in their failure mechanism, and its determination can be beneficial in optimizing the design of the rock structures. Schistose rocks due to their inherent anisotropy in different foliation directions show a diverse strength at each direction. The purpose of this work was to compare and assess the tensile strength of phyllite, which was obtained in direct and indirect tensile tests in different foliation directions. To this end, several phyllite specimens with different foliation angles (۰º, ۳۰º, ۴۵º, ۶۰º, and ۹۰º) related to the loading axis (β) were prepared. Finally, the direct tensile test, diametrical and axial point load tests, Brazilian test, and Schmidt hammer test were conducted on ۱۸۸ samples. The results of the experimental tests revealed that the maximum and minimum tensile strengths in direct tensile testing tension were directly related to the angles of ۰º and ۹۰º. Also it was observed that the Brazilian tensile strength overestimated the tensile strength. Furthermore, an exponential correlation was introduced between the direct tensile strength and the Brazilian tensile strength.
کلیدواژه ها:
نویسندگان
F. Rastegar
Rock Mechanics Division, School of Engineering, Tarbiat Modares University, Tehran, Iran
H. R. Nejati
Rock Mechanics Division, School of Engineering, Tarbiat Modares University, Tehran, Iran
A. Ghazvinian
Rock Mechanics Division, School of Engineering, Tarbiat Modares University, Tehran, Iran
M. R. Hadei
Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran
A. Nazerigivi
Faculty of Civil Engineering, University of Minho, Braga, Portugal
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :