A Method for Determining the Amount of Asphaltene Adsorbed to Metal Surfaces Upon Exposure to Solvents
سال انتشار: 1399
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 326
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NTOGP02_005
تاریخ نمایه سازی: 22 اردیبهشت 1400
چکیده مقاله:
Quartz crystal microbalance (QCM) has been used to investigating the effect of different factors suchas concentration, n-hexane ratio on the asphaltene adsorption on a metal surface. Different tolueneasphaltenesolution at concentrations of ۱۰۰ to ۲۰۰۰ mg /L have been used for asphaltene adsorptionexperiments on metal and surfaces of carbonate rock. Experimental results showed that the asphalteneadsorption on gold surface has increased by increase in concentration of asphaltene and ratio of nhexaneto toluene. Adsorption of asphaltene is extremely dependent on the nature of the solvent, so thatwhen the hexane/toluene ratio increases, absorption of asphaltene from the solution increases to acertain ratio and then decreases
کلیدواژه ها:
نویسندگان
Mojtaba Asharafi
Petroleum Engineering Department, Ahvaz Faculty of Petroleum Engineering, Petroleum University ofTechnology (PUT), Ahvaz, Iran
Sepidey Veiskarami
Petroleum Engineering Department, Ahvaz Faculty of Petroleum Engineering, Petroleum University ofTechnology (PUT), Ahvaz, Iran
Bahram Soltani Soulgani
Petroleum Engineering Department, Ahvaz Faculty of Petroleum Engineering, Petroleum University ofTechnology (PUT), Ahvaz, Iran
Ghasem Zargar
Petroleum Engineering Department, Ahvaz Faculty of Petroleum Engineering, Petroleum University ofTechnology (PUT), Ahvaz, Iran