Design of Solar-powered Endurance Glider with Vortex Generators
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 190
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_RERA-2-1_001
تاریخ نمایه سازی: 20 تیر 1400
چکیده مقاله:
The research aims at designing a solar endurance glider for an increased flight time. The constraints for design include reduction in weight compared to a typical glider and improving its aerodynamic performance by application of vortex generators on its wingspan. The design of each component was performed through various stages of similitude cases; furthermore, the components, such as solar panels and vortex generators were selected based on a decision matrix design process. This research utilized ANSYS ۱۸.۱ K-Omega SST turbulence simulation techniques to successfully simulate the glider at different speeds along with various angle of attacks for aerodynamics optimization. The results show an improvement in lift force from ۱۶۰ N to ۱۹۲ N once the vortex generators were installed. ۱۶ solar cells are installed on the glider’s wings providing ۵۷.۶ Watts of power. This study faced a limitation on the physical testing using a wind tunnel for validation; therefore, the team relied on CFD simulations verification from published data. This report details the concept of boundary layer, design process, glider simulation as well as glider configuration, such as the wingspan and total length. The glider should be able to maintain a flight time of at least ۶ hours with vortex generators and solar panels.
کلیدواژه ها:
نویسندگان
Sh. Sham Dol
Department of Mechanical Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
S. Shahid Pervaiz
Department of Mechanical Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
M. Uzair
Department of Mechanical Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
Sh. Khalid Bashir
Department of Mechanical Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
M. Mustafa Elzughbi
Department of Mechanical Engineering, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :