Tribological Properties of Al۲۰۲۴-۲wt.%TiO۲ Nanocomposite Produced by Mechanical Alloying and Hot-Pressing
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 8، شماره: 4
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 156
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-8-4_002
تاریخ نمایه سازی: 9 مرداد 1400
چکیده مقاله:
Aluminum matrix composites has recently gained increased attention for structural applications in many industries due to their excellent properties. In this research, machining scraps of coarse-grained Al۲۰۲۴-T۳ alloy were used to prepare nanostructured Al۲۰۲۴ alloy and Al۲۰۲۴-۲wt.%TiO۲ nanocomposite. Then, tribological behavior of bulk nanostructured Al۲۰۲۴ alloy and Al۲۰۲۴-۲wt.%TiO۲ nanocomposite, produced by ۱۰ h of mechanical alloying and subsequent hot-pressing at ۵۰۰ C for ۲۰ min, was investigated. Hardness measurements on the samples revealed that the hardness value of mechanically alloyed and hot-pressed Al۲۰۲۴ alloy reached a value of ۱۹۸ HV, which was ۴۱% higher than that for the initial coarse-grained Al۲۰۲۴-T۳ alloy (۱۴۰ HV). The average hardness values of Al۲۰۲۴-۲wt.%TiO۲ nanocomposite was found to be ۲۳۸ HV, which showed ~ ۲۰% increase compared with that for the nanostructured Al۲۰۲۴ alloy. The wear resistance of samples changed in the order of coarse-grained Al۲۰۲۴ alloy
کلیدواژه ها:
نویسندگان
Hamid Ashrafi
Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, ۳۶۱۹۹۹۵۱۶۱, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :