Temperature Dependent Damping in Additively Manufactured Polymer Structures
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 214
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-7-0_001
تاریخ نمایه سازی: 20 مرداد 1400
چکیده مقاله:
Temperature effects are predominantly ignored when computing the dynamic response of structures. Yet, in applications where large changes in temperature occur, the dynamic response can drastically change. This is particularly true for polymers. While the temperature effects on modulus and loss factor are often available for most polymers, this change is not addressed or corrected for. Meanwhile, the recent research on additively manufactured polymer metastructures has yet to consider the effects of temperature change on their ability to suppress vibrations. In order to fill this gap, the study presented in this paper focuses on the effects of temperature change on additively manufactured structures.
کلیدواژه ها:
نویسندگان
Katherine K. Reichl
Department of Mechanical Engineering, Milwaukee School of Engineering, ۱۰۲۵ North Broadway, Milwaukee, WI, ۵۳۲۰۲, USA
Onur Avci
Civil, Construction and Environmental Engineering, Iowa State University, ۳۹۴ Town Engineering, ۸۱۳ Bissell Road, Ames, IA, ۵۰۰۱۱, USA
Daniel J. Inman
Department of Aerospace Engineering, University of Michigan, ۱۳۲۰ Beal Ave, Ann Arbor, MI, ۴۸۱۰۹, USA
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :