Investigation of In-Situ Compressive Strength of Fiber-Reinforced Mortar and the Effect of Fibers on the Adhesion of Mortar/Steel

سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 241

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-14-2_004

تاریخ نمایه سازی: 24 مرداد 1400

چکیده مقاله:

The proper connection between mortar and steel is one of the crucial issues in civil engineering. This paper has investigated the effect of polypropylene fibbers on the bond between cement mortar and steel, using “Twist-off” and “pull-off” tests. Moreover, in order to assess the in-situ mechanical properties of fibre-reinforced mortars, the correlation of records obtained from semi-destructive methods of “Twist-off” and “pull-off” with those of laboratory tests was determined, and calibration curves were provided, using the regression analyses. The mentioned tests were modelled with the ABAQUS software to evaluate the distribution of stresses and cracks developed during the semi-destructive tests. The results show that the addition of polypropylene fibbers reduces the shrinkage of mortars by about ۱۳% and this has a direct effect on the bond between the mortar and steel. So that the shear and tensile bond of fibre-reinforced mortars at ۹۰ days is ۷۵% and ۹۴% higher than conventional mortars, respectively. The reason for this is the effect of fibbers on the process of hydration of mortars and also to prevent excessive opening of cracks, which is shown by SEM. According to the results, instead of using an expensive and imported pull-off device, a cheap and internal twist-off device can be used to measure adhesion. Also, to evaluate the compressive strength of mortars, twist-off and pull-off tests can be used by placing the readings obtained in the equations y = ۰.۱۵۶x + ۰.۳۲۹ and y = ۰.۰۵۵x-۰.۰۰۱ instead of x, respectively, to evaluate the compressive strength of mortars.

کلیدواژه ها:

نویسندگان

Ali Saberi Varzaneh

Ph.D. Candidate, Department of Civil Engineering, Imam Khomeini International University, Qazvin, Iran

Mahmood Naderi

Professor, Department of Civil Engineering, Imam Khomeini International University, Qazvin, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Neville, A. M., Properties of Concrete, Fifth ed., Harlow, United ...
  • Naderi, M., Adhesion of Different Concrete Repair Systems Exposed to ...
  • Lifang, L., Peiming, W., and Xiaojie, Y. Effect of Polypropylene ...
  • Mohamed, R. A. S., Effect of Polypropylene Fibers On the ...
  • Dharan, D. S., Lal, A., Study the Effect of Polypropylene ...
  • Vikrant, S., Kavita, V., Kene, S., and Deshpande, N. V., ...
  • Tilly, G. P., Jacobs, J., Concrete Repairs: Observations On Performance ...
  • Beushausen, H., Alexander, M., Localised Strain and Stress in Bonded ...
  • Wu, D., Gao, W., Feng, J., and Luo, K. Structural ...
  • Martinola, G., Sadouki, H., and Wittmann, F., Numerical Model for ...
  • Neville, A. M., Brooks, J. J., Tecnologia Do Concreto, Porto ...
  • Araujo, D. A., Danin, A. R., Melo, M. B., and ...
  • Naderi, M., Friction-Transfer Test for the Assessment of In-Situ Strength ...
  • Naderi, M., Ghodousian, O., Adhesion of Self-Compacting Overlays Applied to ...
  • Naderi, M., Effects of Cyclic Loading, Freeze-Thaw and Temperature Changes ...
  • Naderi, M., New Twist-Off Method for the Evaluation of In-Situ ...
  • ASTM C۱۵۸۳, Standard Test Method for Tensile Strength of Concrete ...
  • ASTM C۹۰۰ – ۰۱, Standard Test Method for Pullout Strength ...
  • Naderi, M., Shibani, R., New Method for Nondestructive Evaluation of ...
  • Naderi, M., Evaluating in Situ Shear Strength of Bituminous Pavments, ...
  • Naderi, M., An Alternative Method for in Situ Determination of ...
  • Naderi, M., New Method for Nondestructive Evaluation of Concrete Strength, ...
  • ASTM C۱۲۷, Standard Test Method for Density, Relative Density (Specific ...
  • ASTM C۱۵۷, Test Method for Length Change of Hardened Hydraulic ...
  • ASTM C۴۹۰, Standard Practice for Use of Apparatus for The ...
  • ASTM C۱۰۹, Standard Test Method for Compressive Strength of Hydraulic ...
  • Alnkaa, A., Yaprak, H., MEMİŞ, S., and Kaplan, G., Effect ...
  • نمایش کامل مراجع