Industry ۴.۰: Some Challenges and Opportunities for Reliability Engineering

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 150

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJRRS-2-1_004

تاریخ نمایه سازی: 16 شهریور 1400

چکیده مقاله:

According to the development of Industry ۴.۰ and increase the integration of digital, physical and human worlds, reliability engineering must evolve for addressing the existing and future challenges about that. In this paper, the principle of Industry ۴.۰ is presented and some of these challenges and opportunities for reliability engineering are discussed. New directions for research in system modeling, big data analysis, health management, cyber-physical system, human-machine interaction, uncertainty, jointly optimization, communication, and interfaces are proposed. Each topic can be investigated individually, but this paper summarizes them and prepared a vision about reliability engineering for consideration and discussion by the interested scientific community.

نویسندگان

Mohammad Ali Farsi

Aerospace Research Institute, Ministry of Science, Research and Technology, Tehran, Iran

Enrico Zio

Energy Department, Politecnico di Milano, Milan, Italy

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Enrico Zio (۲۰۱۶). Some Challenges and Opportunities in Reliability Engineering. ...
  • R. Geissbauer, s. Schrauf, v. Koch and s. kuge. Industry ...
  • S. Weyer, M. Schmitt, M. Ohmer, D. Gorecky (۲۰۱۵). Towards ...
  • Lasi, H., Fettke, P., Kemper, H.G., Feld, T., Hoffmann, M. ...
  • Stock, T., Seliger, G. (۲۰۱۶). Opportunities of sustainable manufacturing in ...
  • Mueller, E., Chen, X.L., Riedel, R. (۲۰۱۷). Challenges and requirements ...
  • Lee, J., Bagheri, B., Kao, H.A. (۲۰۱۵). A cyber-physical systems ...
  • Condry, M.W., Nelson, C.B. (۲۰۱۶). Using smart edge IoT devices ...
  • Wang, S., Wan, J., Zhang, D., Li, D., Zhang, C. ...
  • Kadera, P., Novák, P. (۲۰۱۷). Performance modeling extension of directory ...
  • https://www.capgemini.com/service/smart-factories-and-the-modern-manufacturer/[۱۳] Kang, H.S., Lee, J.Y., Choi, S., Kim, H., Park, ...
  • Huang, Z., Yu, H., Peng, Z., Feng, Y. (۲۰۱۷). Planning ...
  • Andrew Kusiak (۲۰۱۹). Fundamentals of smart manufacturing: A multi-thread perspective, ...
  • Hervé Panetto, Benoit Iung, Dmitry Ivanov, Georg Weichhart, Xiaofan Wang ...
  • V. Alcácer, V. Cruz-Machado (۲۰۱۹). Scanning the Industry ۴.۰: A ...
  • Saurabh Vaidya, Prashant Ambad, Santosh Bhosle (۲۰۱۸). Industry ۴.۰ – ...
  • Erwin Rauch, Christian Linder, Patrick Dallasega (۲۰۱۹). Anthropocentric perspective of ...
  • M. Najafi, M A Farsi, H. Jabbari kh. (۲۰۱۸). Dynamic ...
  • Farsi, M. (۲۰۱۸). Fault Analysis of Complex Systems via Dynamic ...
  • Md. Abdul Moktadir, Syed Mithun Ali, Simonov Kusi-Sarpong, Md. Aftab ...
  • Seyed Mohsen Hosseini, Kash Barker, Jose E. Ramirez Marquez (۲۱۰۶). ...
  • [۲۹]Dinh, L. T. Pasman, H., Gao, X., Sam Mannan, M. ...
  • Jing Wang, Wangda Zuo, Landolf Rhode-Barbarigos, Xing Lu, Jianhui Wang, ...
  • Wang C, Xu J, WAng H, Zhang Z. (۲۰۱۸). A ...
  • Farhad Zahedi-Hosseini, Philip Scarf (۲۰۱۸). Aris Syntetos. Joint maintenance-inventory optimization ...
  • M Galagedarage Don, F Khan, (۲۰۱۹). Process fault prognosis using ...
  • Yu Liu, Qinzhen Liu, Chaoyang Xie, Fayuan Wei (۲۰۱۹). Reliability ...
  • Xiaogang Song, Zhengjun Zhai, Yidong Liu, J. Han (۲۰۱۸). A ...
  • Olde Keizer MCA, Flapper SDP, Teunter RH. (۲۰۱۷). Condition-based maintenance ...
  • Arnesh Telukdarie, Eyad Buhulaiga, Surajit Bag, Shivam Gupta, Zongwei Luo ...
  • M Abimbola, F Khan (۲۰۱۹), Resilience modeling of engineering systems ...
  • Fei Tao, Qinglin Qi, Ang Liu, Andrew Kusiak (۲۰۱۸). Data-driven ...
  • Aftab A. Chandio, Nikos Tziritas, Cheng-Zhong Xu (۲۰۱۵), Big-Data Processing ...
  • [۴۴]Mohammad Ali Farsi, S. Masood Hosseini (۲۰۱۹), Statistical distributions comparison for remaining useful ...
  • Brian Albright (۲۰۱۹). Deep learning and design engineering, addressed by: ...
  • Miketen Wolde, Adel A. Ghobbar (۲۰۱۳). Optimizing inspection intervals—Reliability and ...
  • Andika Rachman, R.M. Chandima Ratnayake (۲۰۱۹). Machine learning approach for ...
  • Khanh T.P.Nguyen, Kamal Medjaher (۲۰۱۹). A new dynamic predictive maintenance ...
  • Xian Zhao, Xiaoxin Guo, Xiaoyue Wang (۲۰۱۸). Reliability and maintenance ...
  • Serkan Eryilmaz, Mustafa Tekin (۲۰۱۹). Reliability evaluation of a system ...
  • F. Ahmadzadeh and J. Lundberg (۲۰۱۴). Remaining useful life estimation: ...
  • XiangLi,Wei Zhang, Qian Ding (۲۰۱۹). Deep learning-based remaining useful life ...
  • Paulo R.L. Almeida,Luiz S. Oliveira, Alceu S. Britto Jr, Robert ...
  • Khanh T.P.Nguyen, Mitra Fouladirad, Antoine Grall (۲۰۱۸). Model selection for ...
  • Qiang Feng, Wenjing Bi, Yiran Chen, Yi Ren, Dezhen Yang ...
  • Software Safety Analysis with UML-Based SRBD and Fuzzy VIKOR- Based FMEA [مقاله ژورنالی]
  • Lucas S. Dalenogare, Guilherme B. Benitez, N. Fabián Ayala, Alejandro ...
  • Framework for Cyber-Physical Systems, Release ۱.۰. May ۲۰۱۶, Cyber-Physical Systems ...
  • Cardin Oliver, (۲۰۱۹). Classification of cyber-physical production systems applications: Proposition ...
  • L. Monostori, B. Kádár, T. Bauernhansl, S. Kondoh, S. Kumara, ...
  • Tao, Fei, Qinglin Qi, Andrew nee et al, (۲۰۱۸). Digital ...
  • Editorial letter (۲۰۱۹). Quality management in the ۲۱st-century enterprises: Research ...
  • Francesco Longo, Letizia Nicoletti, Antonio Padovano (۲۰۱۷). Smart operators in ...
  • Iveta Zolotová, Peter Papcun, Erik Kajáti, Martin Miškuf, Jozef Mocnej ...
  • Julie Bell and Justin Holroyd (۲۰۰۹). Review of human reliability ...
  • Romero, D., Stahre, J., Wuest, T., Noran, O., Bernus, P., ...
  • Stojkić, Ž.; Veža, I. & Bošnjak, I. (۲۰۱۵). A concept ...
  • https://www.merriam-webster.com/[۷۴] M. a. Farsi (۲۰۱۶). Principle of reliability engineering, Simayeh ...
  • David W. Coit , Enrico Zio. (۲۰۱۹), The Evolution of ...
  • Sai Zhang, Mengyu Du, Jiejuan Tong, Yan-FuLi. (۲۰۱۹) Multi-objective optimization ...
  • Ronald M. Martinod,, Olivier Bistorin ,Leonel F. Castañeda ,Nidhal Rezg. ...
  • Carl S. Carlson (۲۰۱۲). Effective FMEAs: achieving safe, reliable, and ...
  • B. Czerny, G. Khatibi (۲۰۱۶). Interface reliability and lifetime prediction ...
  • Jens Due,Anthony J. Robinson. (۲۰۱۳), Reliability of thermal interface materials: ...
  • Sascha Heinssen, Theodor Hillebrand, Maike Taddi, kenKonstantin, Tscher kaschinSteffen, PaulDagmar ...
  • Marc C. Kennedy, Anthony O'Hagan (۲۰۰۱), Bayesian calibration of computer ...
  • Ba Kader, Dellagi Sofiene, Rezg Nidhal, Erray Walid (۲۰۱۶).Joint optimization ...
  • Chiara Franciosi, Alfredo Lambiase, Salvatore Miranda(۲۰۱۷). Sustainable Maintenance: A Periodic ...
  • Munsamy, M., A. Telukdarie (۲۰۱۹). Application of Industry ۴.۰ towards ...
  • Birkel, H.S., Veile, J.W., Müller, J.M., Hartmann, E., Voigt, K. ...
  • Surajit Bag, Arnesh Telukdarie, J.H.C. Pretorius, Shivam Gupta (۲۰۱۸). Industry ...
  • نمایش کامل مراجع