Tribological behavior of sputter-deposited MoSX/Ni coatings
محل انتشار: فصلنامه مواد پیشرفته و فرآوری، دوره: 6، شماره: 2
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 102
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMATPR-6-2_008
تاریخ نمایه سازی: 12 مهر 1400
چکیده مقاله:
AbstractSputtered MoS۲ coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from ۰ to ۲۲ % were deposited onto steel substrate using a DC magnetron sputter process. The MoS۲/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the coatings were explored using an energy dispersive analysis of X-ray (EDX), Xray diffraction (XRD), nano indentation, and scratch techniques. The tribological behavior of the coatings was investigated using the pin-on-disc test at room temperature. The nickel doping in MoS۲–Nix% coatings improves their mechanical properties, cohesive strength and tribological properties. The films exhibited a steady state friction coefficient from ۰.۱۳ to ۰.۱۹ and the main wear mechanisms of the MoSx/Ni coating in air were abrasive, adhesive, and oxidation wear.Keywords: MoSX/Ni coating; Tribological properties; PVD ; Low friction; Solid lubricant; Low friction; Solid lubricant
کلیدواژه ها:
نویسندگان
mehdi akbarzadeh
Department of Metallurgy and Materials science, Faculty of Engineering, Shahid Bahonar University of Kerman, Jomhoori Eslami Blvd., Kerman, Iran
morteza zanrahimi
Department of Metallurgy and Materials science, Faculty of Engineering, Shahid Bahonar University of Kerman, Jomhoori Eslami Blvd., Kerman, Iran
ehsan moradpor
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran