Using Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 133
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MPMPJ-3-2_003
تاریخ نمایه سازی: 23 مهر 1400
چکیده مقاله:
Production of thin steel strips with ۰.۱۸-۰.۲۶ mm thickness is about ۰.۷۵ of annual production of the two stand reversing cold mill, while its efficiency is ۶۰%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than ۰.۱۸ millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the strip and thermal conditions result in the rupturing of steel strips. Usually, cold rolling of several coils of thick steel strips, for example ۰.۳ -۰.۵ mm thickness, for the first rolling pass is necessary. This primary preparation reduces the work rolls life and produces unneeded coils. In this study, by experimental investigation, the effective parameters such as lubrication condition, surface roughness of work rolls and their improvement, the possibility of cold thin steel strip rolling is examined. Finally, several methods for improvement the cold rolling efficiency and decreasing the amount of strip rapture in the two stand reversing cold mill are presented.
نویسندگان
Mohammad Heydari Vini
Department of Engineering, Islamic Azad University, Mobarakeh Branch, Mobarakeh, Isfahan, Iran