Idealized Bilinear Moment-Curvature Curves of Slender Rectangular RC Wall Sections
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 145
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSEE-17-4_001
تاریخ نمایه سازی: 8 آبان 1400
چکیده مقاله:
Methods are proposed to develop idealized moment-curvature response curves of slender rectangular RC wall sections with uniformly distributed longitudinal reinforcement, using limit states, namely, cracking of concrete in tension, tensile yielding of reinforcement layers, and compression failure of concrete. It is recommended that tensile yielding of an inner layer of reinforcement is considered to develop idealized moment-curvature response curve of RC wall sections in the absence of compressive axial load, as against tensile yielding of extreme layer of reinforcement in the presence of compressive axial loads. Distance of the critical inner layer of reinforcement from highly compressed edge depends on percentage of longitudinal reinforcement in the section; the distance varies from ۰.۵D to ۰.۹۸D with an increase in percentage of longitudinal reinforcement, where D is the length of the wall, but does not depend on plan aspect ratio. Furthermore, axial-flexure interaction envelope can also be developed from the idealized moment-curvature response curves.
کلیدواژه ها:
نویسندگان
P. Sunitha
Indian Institute of Technology Madras
C.V.R. Murty
Indian Institute of Technology Madras
Rupen Goswami
Indian Institute of Technology Madras
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :