Thermal Degradation of HDPE/Caco3 Nanocomposites: Effect of Content of Nano and MFI
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,263
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_217
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
In the present study different series of high-density polyethylene (HDPE) nanocomposites, containing 1, 3 and 5 wt.% of carbonate calcium (CaCo3) nanoparticles and HDPE with different MFI were prepared by melt-mixing on a internal mixer(plasticorder PL2000 Brabender). From TGA analysis, the decomposition temperature of nanocomposites with surface treatment of nano and HDPE with high MFI increased and has higher resistance to thermal degradation. According to the SEM micrographs, it was found that a much better dispersion of nano CaCo3 in samples with higher MFI also according to the SEM and TEM measurement, was found that nano CaCo3 with surface treatment has better dispersion compared nano without surface treatment. The properties of HDPE and its nanocomposite were investigated through differential scanning calorimetery (DSC) test. The results of DSC tests showed that the addition of nano-sized calcium carbonate to HDPE caused to increase the heat capacity and crystallinity.
کلیدواژه ها:
نویسندگان
Mojtaba Saeedi
Department of Chemical Engineering Farahan branch, Islamic Azad University Farahan, Iran
Salman Jiryaie
Department of Chemical Engineering Farahan branch, Islamic Azad University Farahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :