Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 160
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-8-2_001
تاریخ نمایه سازی: 2 دی 1400
چکیده مقاله:
In the present paper, the exact modeling and frequency analysis of the mass sensor nanobeam are investigated based on a higher-order elasticity theory with taking into account the longitudinal discontinuity. The energy equations of the beam are expressed considering discontinuity, and finally, the vibration equations and boundary conditions of the non-uniform nanobeam are derived using Hamilton’s principle. By the implementation of an analytical solution, the number of shape functions equal to longitudinal discontinuities is assumed. Then, by expressing the compatibility and boundary conditions, the frequency equation of the discontinuous nanobeam is obtained and solved. Effects of different parameters such as sensed mass and size effects on the frequency behavior of the nanobeam are investigated at various vibrational modes. The results show that accurate modeling of discontinuous nanobeam is important. Also, Changing the position of the sensed mass to the free end of the nanotube increases the sensing feature of the beam, and the size effect reduces it. The size effect reduces the frequency and increases the amplitude of the mode shape, especially at higher vibrational modes. The results also show that the sensing feature of the mass sensor nanobeam is more prominent at higher modes of vibration, and therefore the use of mass sensor nanobeam at higher vibrational modes is recommended.
کلیدواژه ها:
نویسندگان
mostafa Nazemizadeh
Faculty of Mechanics, Male Ashtar University of Technology, Iran
Hadi Saffari
Faculty of Mechanics, Male Ashtar University of Technology, Iran
Abbass Assadi
Faculty of Mechanics, Male Ashtar University of Technology, Iran
Moein Taheri
Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :