An Airborne and Gimbal Mounted IMU Signal Simulator Considering Flight Dynamics Model
محل انتشار: نوزدهمین کنفرانس بین المللی انجمن هوافضای ایران
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 204
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
AEROSPACE19_196
تاریخ نمایه سازی: 10 دی 1400
چکیده مقاله:
A proper inertial measurement unit (IMU) signal simulator is a fundamental requirement in design, development, improvement, test and verification ofintegrated inertial navigation systems (INS). Current efforts on this topic focus on simulation of strapdown INS (SINS) with the IMU rigidly attached to themoving platform frame. However in some custom applications such as pointing a stabilized camera or a surveying sensor, it is necessary to mount the IMU ona ۲- or ۳-degrees of freedom (DoF) Gimbal. It is important to capture IMU average acceleration and rotation rate signals and to estimate the accurateposition, velocity and attitude of the gimbal/sensor frame to be used for both pointing stabilization and compensation of motion effects on the observationscaptured by the surveying sensor(s). Hence a Gimbal mounted IMU signal simulator is of high interest. We present such an IMU signal simulator that is onboard a simulated aircraft with realistic flight dynamics model (FDM) and ۳DoF Gimbal model. It enables thorough evaluation of aided inertial navigation algorithms with ariable/dynamic lever arms in both simulated and hardware-in-loop (HIL) cases. The proposed simulator is validated by unit and functional tests.
کلیدواژه ها:
Gimbal Mounted IMU – Simulator – Strapdown INS – Flight Dynamics Model
نویسندگان
Alireza Kazemi
Assitant Prof., Mathematics Dept., Faculty of Science, Shiraz University
Reza Rohani Sarvestani
Assistant Prof., Computer Eng. Dept., Engineering School, Shahrekord University