Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 144
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_RIEJ-10-2_003
تاریخ نمایه سازی: 28 دی 1400
چکیده مقاله:
Optimization and selecting effective design parameters are a big issue in the field of product design and development. The optimal value determination for design parameters is a challenge for the furniture industry. Therefore, an appropriate statistical approach is required. In this research the full factorial two-level four-factor design of experiment method was used to determine the optimal values for a shape changeable furniture. For the m-chair’s- which can be used as a chair, floor bed, and table, four design parameters- bending axis material surface roughness, density of body material, width of the surface plane, and the number of bending axis were evaluated on basis of the performance time of shape changing where the optimal value of influential parameters were determined for a minimum reshaping time using Minitab. This method can be implemented for unique product design. But for further study, different form changing times should be considered individually.
کلیدواژه ها:
Full factorial DOE analysis ، Two-level four-factor DOE ، Minimization optimization model ، Shape-changeable furniture design
نویسندگان
Mobasshira Zaman
Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :