Numerical Analysis of the High Speed Driven Cavity Flow in ۲-D Curved Channel

Numerical experiments were carried out on the high speed driven cavity flows in ۲D curved channels to investigate mainly the pressure field. A density-based algorithm in ANSYS Fluent ۱۳.۰ was used in the present URANS simulations. The SST k- ω model was used for modeling the turbulence within an unstructured mesh solver. Validation of the numerical code was accomplished, and the results showed a good agreement between the numerical simulation and experimental data. Three channels (straight, concave and convex) with a nominal height of H = ۴ × ۱۰ −۳ m under the transonic flow conditions were considered in the study. The cavity studied is L = ۱۲ × ۱۰ −۳ m long with the depth ranging from D = ۱۲ × ۱۰ −۳ m to ۴۸ × ۱۰ −۳ m to obtain the length-to-depth ratios of L /D=۱ to ۱ /۴. The study comprised the analysis of the cavity surface pressures and the associated flow structures. The channel configuration influenced the cavity flowfield, and that influence finally resulted in a change in the surface pressure fluctuations in the cavity. The deep cavity attenuated the flowfield oscillation inside the cavity.