Large Eddy Simulation of GDI Single-hole and Multi-hole Injector Sprays with Comparison of Numerical Break-up Models and Coefficients
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 175
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-9-2_049
تاریخ نمایه سازی: 5 بهمن 1400
چکیده مقاله:
In the present study the fuel spray of a gasoline direct injected engine with multi-hole injector is simulated. Simulation inputs data, injection flow rate and spray cone angle are obtained from previous experimental studies. Log-normal distribution with different standard deviation is used for initial droplet size as the primary break-up model in order to reach the agreement between experimental and calculated spray tip penetration. As the first step, only one plume of spray injected into a quiescent air environment is simulated and validated by varying break-up model and standard deviation. Then, with coefficient obtained from the single jet simulation all six spray jets are simulated based on the injector nozzles geometry. The comparison between single-jet simulation and multi-jet simulation shows that validated model coefficients for the single-jet spray cannot be used for multi-jet spray simulation without significant modifications due to adjacent jet interaction and pressure drag. A set of new coefficients for the multi-jet spray is presented
کلیدواژه ها:
Gasoline Direct Injection (GDI) engine ، hole and multi ، Single ، hole spray ، spray tip penetration ، Large eddy simulation
نویسندگان
H. Zamani
Mechanical Engineering Department, Center of Excellence in Energy Conversion, Sharif University of Technology, Tehran, Iran
V. Hosseini
Mechanical Engineering Department, Center of Excellence in Energy Conversion, Sharif University of Technology, Tehran, Iran
H. Afshin
Mechanical Engineering Department, Center of Excellence in Energy Conversion, Sharif University of Technology, Tehran, Iran
L. Allocca
IstitutoMotori CNR, Napoli, Italy
M. Baloo
Iran-Khodro Powertrain Company IPCO, Tehran, Iran