Thermo-Mechanical Treatment of AlCoCrFeNi۲.۱ High-Entropy Alloy
محل انتشار: مجله شکل دهی مواد، دوره: 9، شماره: 1
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 160
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMF-9-1_006
تاریخ نمایه سازی: 8 اسفند 1400
چکیده مقاله:
In this study, the microstructural evolutions, formed phases, micro- and macro-hardness changes and shear properties were evaluated in the as-cast, homogenized, cold-rolled and annealed AlCoCrFeNi۲.۱ eutectic high-entropy alloy (EHEA). These studies were carried out using X-ray fluorescence (XRF), scanning electron microscopy (SEM), Rockwell C and Vickers hardness testing as well as shear punch testing (SPT). The microstructure after cold rolling followed by annealing was consisted of an elongated phases/grains in the direction of cold rolling and in almost equiaxed phases/grains. The homogenized specimen has the minimum amounts of hardness and yield/ultimate shear strength. Due to the presence of both elongated and equiaxed structures in the cold-rolled and annealed sample, the hardness and yield/ultimate shear strength of this specimen is between that of as-cast and homogenized cases.
کلیدواژه ها:
نویسندگان
Seyed Ali Erfani Mobarakeh
Department of Materials and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave., P.O. Box ۱۵۸۷۵-۴۴۱۳, Tehran, Iran
Kamran Dehghani
Department of Materials and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave., P.O. Box ۱۵۸۷۵-۴۴۱۳, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :