Experimental Investigation into the Hydrodynamics Effects of Slot Film Cooling on a Cylindrical Model
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 7، شماره: 4
سال انتشار: 1373
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 145
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-7-4_004
تاریخ نمایه سازی: 19 اسفند 1400
چکیده مقاله:
An experimental study of hydrodynamics of film cooling is performed by using a single longitudinal slot on a cylindrical model simulated to the leading edge of the gas turbine blade. The model is set up into the test section of an open-circuit induced flow wind tunnel which provides the main flow. The injected air, as a secondary film flow, produced from a high pressure compressor is considered so that, the cooling factor always remained between ۰.۱ and ۳.۹. The first separation region of the boundary layer over the cylinder caused by the presence of injected flow was determined. The separation region extends up to ۲۰ degrees after injection point with different conditions used in this experiment.
کلیدواژه ها:
Gas Turbine Blade ، Leading Edge ، Film Cooling ، Slot Film Cooling ، Cooling Factor ، Effectiveness of Film Cooling
نویسندگان
E. Esmailzadeh
Mechanical Engineering, Sharif University of Technology