The Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 20، شماره: 1
سال انتشار: 1386
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 203
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-20-1_008
تاریخ نمایه سازی: 20 اسفند 1400
چکیده مقاله:
A square splittered and unsplittered rod is placed in a turbulent boundary layer developed over a flat plate. The effect of the resulting disturbances on the local heat transfer coefficient is then studied. In both cases the square rod modifies the flow structure inside the boundary layer. As a result, a stagnation point, a jet and wake area are generated around the square rod, each making a contribution in disturbing the boundary layer and effect on the heat transfer coefficient from the neighboring flat plate. Effects of distance of square rod from the flat plate, inclusion of a splitter at the downstream of the rod, splitter length and its location relative to the square rod on local heat transfer coefficient in a variety of cases are studied. It is concluded that the effect of stagnation point is always to reduce the local heat transfer; the jet and wake both contribute on increasing heat transfer from the flat plate. The contribution of splitter on disturbing the boundary layer is not significant when compared to the effect of square rod when used alone. Splitter on its own contributes to controlling the wake effect and by changing the wake size and its structure reduces the wake effect on heat transfer. However these all depend on geometrical size and positioning of the splitter.
کلیدواژه ها:
نویسندگان
A. Haidarie
Engineering, Ferdowsi University of Mashhad
S. Farievar
Mechanical Engineering, Ferdowsi University of Mashhad
Mohsen Kahrom
Mecanical Engineering, erdowsi University of Mashhad