Manufacturing of a mechatronic system to improve the initial starting of the Darrieus vertical wind turbine
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 174
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME18_082
تاریخ نمایه سازی: 8 خرداد 1401
چکیده مقاله:
In this paper, a mechatronic driver system to improve the performance of Darrieus vertical axis wind turbines was designed and manufactured. Darrieus turbines have higherefficiency rather than other vertical axis turbines but their main problem is weak self-starting in low and medium wind speeds. This mechatronic driver system designed to solve the self-starting problem. Driver system has three main parts consist of solar panel, electronic pieces and mechanical driver. An electrical interface circuit and buck-boost converter is designed to be able to control the charging and discharging current of the capacitive bank in addition to matching the voltage of the capacitor bank. This interface circuit was provided a constant voltage and current to start the Darrieus wind turbine for ۳۵ seconds. Results of the performance evaluation showed that the proposed starter mechanism was able to produce the required torque at wind speeds of ۳.۵ m/s. Also, wind energy has the ability to rotate the turbine at wind speed as ۲ m/s lower than ordinary working speed steadily
کلیدواژه ها:
نویسندگان
Mirmilad Nabavian
MSc student in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran
Shahriar Kouravand
Associated Professor in Mechanical Engineering, Agrotechnology Department, University of Tehran, Tehran, Iran
Mohammad Dehghani
Assistant Professor in Mechanical Engineering, Food Technology Department, University of Tehran, Tehran, Iran
Ali M Kermani
Assistant Professor in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran