Numerical study of turbulent forced convection jet flow of nanofluid in a converging sinusoidal channel
محل انتشار: مجله بین المللی ابعاد نانو، دوره: 7، شماره: 1
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 131
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJND-7-1_007
تاریخ نمایه سازی: 24 تیر 1401
چکیده مقاله:
Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer by increasing the total heat transfer from a surface and changing the behavior of the flow. In this paper two-dimensional incompressible nanofluid flow in a confined sinusoidal converging jet in turbulent flow regime is numerically investigated. Results have been shown for the flow structure at different Reynolds numbers for steady asymmetric jet development at various values of the duct-to-jet width ratio (aspect ratio), different amplitudes of surface undulation and different volume fractions of nanoparticles. For considering unsteady treatment of the flow, the streamlines and temperature contours result for the unsteady problem is presented and compared with the steady results. The present computations are in a very good agreement with experimental results in open literature. The results show that by increasing the Reynolds number, aspect ratio, amplitude and volume fraction the average the Nusselt number will increase.
کلیدواژه ها:
نویسندگان
A. Taheri
School of Mechanical Engineering, Mazandaran University of Science and Technology, Babol, Iran.
E. Aboukazempour Amiri
Department of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran.
A. Ramiar
School of Mechanical Engineering, Babol University of Technology, P. O. Box ۴۸۴, Babol, Iran.
A. A. Ranjbar
School of Mechanical Engineering, Babol University of Technology, P. O. Box ۴۸۴, Babol, Iran.
M. Rahimi-Esbo
School of Mechanical Engineering, Babol University of Technology, P. O. Box ۴۸۴, Babol, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :