Assessment of particle size distribution and tensile properties of hybrid epoxy composite reinforced with functionalized graphene and CNT nanofillers
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 182
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCARME-12-1_001
تاریخ نمایه سازی: 8 شهریور 1401
چکیده مقاله:
The synergetic effect of amine functionalized multiple graphene layers (AMGL) and multi-walled carbon nanotube (AMWCNT) nano-fillers mixed with epoxy resin is investigated on the particle size distribution (PSD) and tensile properties of hybrid composites. The hybrid composites with an equal ratio of nano-fillers at a weight percent of ۰.۲۵, ۰.۵۰, ۱, and ۲ wt % are fabricated. The particle size analysis (PSA) is performed by the dynamic light scattering (DLS) technique and image analysis (IA) method; both verify PSD for composites. This is further verified by the analyses of scanning electron microscopy (SEM) images using Image J software. The optimum composite particle size of ۶.۸ µm and homogeneous mixture with a poly-dispersity index (PI) of ۰.۷۴ is investigated for a sample having filler content of ۰.۵ wt %. Tensile stress and elastic modulus is also found to be maximum at ۰.۵ wt %, which is ۴۹.۹۱ MPa of ۲۳۰۲ Mpa, respectively. The chemical composition of composite affecting its PSD is characterized by energy dispersive X-ray (EDX) process. Dimensional analysis of particle size in the domain of epoxy matrix provides deep insights to the researchers and may also provide them a direction for selecting an appropriate material for a particular application.
کلیدواژه ها:
نویسندگان
Manoj Shukla
Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, Mathura ۲۸۱۴۰۶, India, Kalaniketan Polytechnic College, Jabalpur ۴۸۲۰۰۱, Jabalpur, Affiliated to Rajiv Gandhi Technical University, Bhopal,
Kamal Sharma
Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University, Mathura ۲۸۱۴۰۶, India
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :