Effect of Disinfection with Hypochlorous Acid on Wettability and Surface Roughness of Polyether Impression Material
محل انتشار: مجله علوم دارویی و شیمی، دوره: 6، شماره: 5
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 147
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMCH-6-5_001
تاریخ نمایه سازی: 21 آبان 1401
چکیده مقاله:
Dental impression can be contaminated through contact with patient's saliva, blood, or plaque and cross-contamination is avoided by disinfecting impression materials. Nevertheless, the disinfectants may affect the wettability and surface roughness qualities. This study aimed to investigate how the wettability and surface roughness of polyether impression material changed after being immersed in two disinfectants (۲% glutaraldehyde for ۱۰ min and ۲۰۰ ppm hypochlorous acid for ۱۵ min.). ۶۰ polyether dental impression material specimens (Monophase Impregum, ۳MESPE, Germany) were randomly categoried into three test groups of ten specimens for each test. A ring mold with a diameter of ۳۰ mm and a thickness of ۶ mm was used to prepare the specimens. The specimens were submerged in two disinfection solutions: ۲% glutaraldehyde and ۲۰۰ ppm hypochlorous acid. The control group did not get any disinfection. The wettability of the specimens was determined by measuring the contact angle with a Goniometer, while surface roughness was determined using a digital Profilometer. The data were submitted to a ۵% variance significance analysis threshold. The results of this study show that wettability and surface roughness of polyether impression material indicate a non-significant difference as compared with the control group (P>۰.۰۵). Within the study's limits, ۲% glutaraldehyde showed safe for ۱۰ minutes of immersion disinfection, whereas immersion in ۲۰۰ ppm hypochlorous acid for ۱۵ minutes shows promise as an efficient disinfectant without compromising the polyether's wettability or surface roughness.
کلیدواژه ها:
نویسندگان
Hashim A.A. kadhim
Prosthodontics department, College of Dentistry, University of Baghdad, Iraq
Shorouq M. Abass
College of Dentistry, University of Baghdad, Baghdad, Iraq
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :