Experimental and Numerical Investigations of the Effect of Impact Angle and Impactor Geometry on the High-Velocity Impact Response of Aluminum Honeycomb Structures

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 148

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JSMA-14-4_001

تاریخ نمایه سازی: 29 آذر 1401

چکیده مقاله:

In this study, the effects of impact angle and impactor geometry were investigated on the impact behavior of aluminum honeycombs experimentally and numerically. The high-velocity impact tests were carried out using a gas-gun test machine with flat, spherical and conical-head impactors and impact angles of ۰°, ۱۵° and ۳۰° at different incident velocities ranging from ۵۵.۸ to ۱۵۰.۵ m/s. The numerical models were developed in LS-Dyna finite element code and well validated against the experimental results. The results showed that the impact behavior of honeycombs is considerably dependent on the impactor head geometry and the impact angle. The honeycomb panel impacted by the conical projectile experienced the highest absorbed energy and ballistic limit velocity. Moreover, it was found out that increasing the impact angle increased the absorbed energy and ballistic limit velocity of honeycombs. Furthermore, different impactor head geometries resulted in different failure mechanisms in the course of impact loading.

نویسندگان

H Alikhani

School of Mechanical Engineering, Iran University of Science & Technology (IUST), Narmak, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran

S Derakhshan

School of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

H Khoramishad

School of Mechanical Engineering, Iran University of Science & Technology (IUST), Narmak, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Zhang X., Zhang H., Wen Z., ۲۰۱۴, Experimental and numerical ...
  • Galehdari S.A., Khodarahmi H., Atrian A., ۲۰۱۷, Design and analysis ...
  • Zhou Q., Mayer R.R., ۲۰۰۲, Characterization of aluminum honeycomb material ...
  • Fleck N.A., Deshpande V.S., ۲۰۰۴, The resistance of clamped sandwich ...
  • Yahaya M.A., Ruan D., Lu G., Dargusch M.S., ۲۰۱۵, Response ...
  • Zhang Q.N., Zhang X.W., Lu G.X., Ruan D., ۲۰۱۸, Ballistic ...
  • Hassanpour Roudbeneh F., Liaghat G., Sabouri H., Hadavinia H., ۲۰۱۸, ...
  • Sun G., Chen D., Wang H., Hazell P.J., Li Q., ...
  • Xu S., Beynon J.H., Ruan D., Lu G., ۲۰۱۲, Experimental ...
  • Zhao H., Gary G., ۱۹۹۸, Crushing behaviour of aluminium honeycombs ...
  • Baker W.E., Togami T.C., Weydert J.C., ۱۹۹۸, Static and dynamic ...
  • Liaghat G.H., Nia A.A., Daghyani H.R., Sadighi M., ۲۰۱۰, Ballistic ...
  • He W., Yao L., Meng X., Sun G., Xie D., ...
  • Guan G.Y., Liu Z.C., Hu G., Zhang Y., ۲۰۱۷, Experimental ...
  • Yamashita M., Gotoh M., ۲۰۰۵, Impact behavior of honeycomb structures ...
  • Wu Y., Meng L.Q., Zhou Z.W., Shu X.F., ۲۰۱۱, Deformation ...
  • Qi C., Remennikov A., Pei L.Z., Yang S., Yu Z.H., ...
  • Hosseini M., Khalili S.M.R., ۲۰۱۳, Analytical prediction of indentation and ...
  • Gunes R., Arslan K., ۲۰۱۶, Development of numerical realistic model ...
  • Galehdari S.A., Kadkhodayan M., Hadidi-Moud S., ۲۰۱۵, Low velocity impact ...
  • Aktay L., Johnson A.F., Kröplin B.H., ۲۰۰۸, Numerical modelling of ...
  • Li L., Zhao Z., Zhang R., Han B., Zhang Q., ...
  • Recht R., Ipson T.W., ۱۹۶۳, Ballistic perforation dynamics, Journal of ...
  • Shariyat M., Moradi M., Samaee S., ۲۰۱۲, Nonlinear finite element ...
  • Talebi S., Sadighi M., Aghdam M.M., ۲۰۱۹, Numerical and experimental ...
  • Wang J., Hu X., Yuan K., Meng., Li P., ۲۰۱۹, ...
  • نمایش کامل مراجع