Fracture analysis of conical shells containing an internal semi-elliptical crack

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 187

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ANMD-1-1_003

تاریخ نمایه سازی: 6 دی 1401

چکیده مقاله:

Conical shells play a significant role in different branches of engineering such as aerospace and oil industries. The purpose of this paper is to analyze the fracture behavior of metallic conical shells containing an internal semi-elliptical crack. An accurate three-dimensional finite element method is employed to model the conical shell using ANSYS standard code. Special singular elements are used to consider the square-root singularity at the semi-elliptical crack front. Stress intensity factors of the cracks which placed in different positions of the shell is calculated. To confirm the accuracy of the present finite element model, both stress distribution of the structure and stress intensity factor of the crack in special case are compared with published results. The effect of different geometrical parameters on the stress intensity factor of the cracks are investigated. Results show that the crack aspect ratio has a significant effect on the stress intensity factor of the cracks.

نویسندگان

C. Burville

Department of Mechanical Engineering, the University of Melbourne Parkville, VIC ۳۰۱۰, Australia.

M.M. Kheirikhah

Department of Mechanical Engineering, the University of Melbourne Parkville, VIC ۳۰۱۰, Australia.

S. Omidi

Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University Qazvin, Iran.

S. Gohari

Department of Mechanical Engineering, the University of Melbourne Parkville, VIC ۳۰۱۰, Australia.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Diamantoudis, A. T. and Labeas, G. N. (۲۰۰۵) ‘Stress intensity ...
  • Moustabchir, H. et al. (۲۰۱۰) ‘Experimental and numerical study of ...
  • Lin, X. B. and Smith, R. a (۱۹۹۸) ‘Fatigue Growth ...
  • Underwood, J. (۱۹۷۲) ‘STP۳۴۱۱۳S @ www.astm.org’. In: Stress Analysis and ...
  • Emery, A. F., Love, W. J. and Kobayashi, A. S. ...
  • Delale, F. and F. Erdogan (۱۹۸۴) ‘Application of Line-Spring Model ...
  • Raju, I. S. and Newman, J. C. (۱۹۸۲) ‘Stress-Intensity Factors ...
  • Wang X, Lambert SB. (۱۹۹۶) 'Stress intensity factors and weight ...
  • Bergman, M. (۱۹۹۵) ‘Stress Intensity Factors for Circumferential Surface Cracks ...
  • Carpinteri, A. (۱۹۹۳) ‘Shape change of surface cracks in round ...
  • Shin, C. S. and Cai, C. Q. (۲۰۰۴) ‘Experimental and ...
  • Shahani, A. R. and Habibi, S. E. (۲۰۰۷) ‘Stress intensity ...
  • Shahani, A. R. and Kheirikhah, M. M. (۲۰۰۷) ‘Stress intensity ...
  • Nabavi, S. M. and Shahani, A. R. (۲۰۰۹) ‘Thermal stress ...
  • El Hakimi, A., Le Grognec, P. and Hariri, S. (۲۰۰۸) ...
  • Meshii, T., Tanaka, T. and Lu, K. (۲۰۱۰) ‘T-Stress solutions ...
  • Wen, J. F. et al. (۲۰۱۱) ‘Creep fracture mechanics parameters ...
  • Predan, J., Močilnik, V. and Gubeljak, N. (۲۰۱۳) ‘Stress intensity ...
  • Yang ST, Ni YL, Li CQ. (۲۰۱۳) 'Weight function method ...
  • Okada, H. et al. (۲۰۱۶) ‘Computations of stress intensity factors ...
  • Zareei, A. and Nabavi, S. M. (۲۰۱۶) ‘Calculation of stress ...
  • Shariati, M., Mohammadi, E. and Masoudi Nejad, R. (۲۰۱۷) ‘Effect ...
  • Aliha, M. R. M. and Gharehbaghi, H. (۲۰۱۷) ‘The effect ...
  • Alizadeh Kaklar, J. and Saeidi Googarchin, H. (۲۰۱۸) ‘Approximate stress ...
  • Ramezani, M. K. et al. (۲۰۱۸) ‘Empirical solutions for stress ...
  • Shlyannikov, V. N., Yarullin, R. R. and Ishtyryakov, I. S. ...
  • Kheirikhah, M. M. and Khalili, S. M. R. (۲۰۱۱) ‘Fracture ...
  • Nami, M. R. and Eskandari, H. (۲۰۱۲) ‘Three-dimensional investigations of ...
  • Seifi, R. (۲۰۱۵) ‘Stress intensity factors for internal surface cracks ...
  • Farahpour, P., Babaghasabha, V. and Khadem, M. (۲۰۱۵) ‘Stress intensity ...
  • Chen, J. and Pan, H. (۲۰۱۳) ‘Stress intensity factor of ...
  • Eskandari, H. (۲۰۱۶) ‘Stress intensity factor of semi-elliptical surface crack ...
  • Eskandari, H. (۲۰۱۸) ‘Three-dimensional investigation of cracked tubes coated with ...
  • Murtaza, U.T., Heydar, M. J. (۲۰۱۷) ‘Stress intensity factors of ...
  • Wang, L. et al. (۲۰۱۷) ‘Finite-Element Analysis of Crack Arrest ...
  • Rekbi, F. M. L., Hecini, M. and Khechai, A. (۲۰۱۸) ...
  • Ugural, A. (۲۰۰۹) Stresses in beams, plates, and shells. CRC ...
  • Barsoum, R. S. (۱۹۷۶) ‘On the use of isoparametric finite ...
  • نمایش کامل مراجع