Effect of Corona Treatment Time on Surface Morphology and Dyeability Properties of Cotton Fabric With Reactive Dye
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 152
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJTNBM-1-1_005
تاریخ نمایه سازی: 8 بهمن 1401
چکیده مقاله:
In this paper was investigated dyeability cotton fabric sample using surface modification to corona discharged method. At first ,In accordance with the design of experiments, We exposed the samples to Corona conditions with power of ۱۰۰ (w) and the main current was ۴A applied, at ۶۰ and ۳۰۰ secs and then dyed with Reactive Yellow K-RN Dyes. Then, scanning electronic microscope(SEM) was used to determine the effects of this operation on the surface morphology and also, a reflective spectrophotometer was employed to evaluate K/S , %R and L* a* b* values. Experiments indicated that dye stability of the samples were good and but with increased time of Corona after washing it was decline. Also, results showed that greater time of Corona operation at a constant pressure, enhanced cracks and pores on the surface morphology of the samples. As, Fourier transform infrared (FTIR) spectroscopy test displayed the effects of the Corona operation on the determination of Surface changes as well as changes in the existing functional groups in fabric after being wash and finally, the optimal conditions of the experiment were determined using the statistical method of Central Composite Design. In fact, aim of this study was to investigate the dyeing properties of cotton fabric and surface morphology changes using corona operation and to obtain optimal dyeing conditions. The results obtained in this research illustrated that optimize condition of cotton fabric samples dyed with the Reactive Yelow۳ dye for K/S۱ and K/S۲ at F-value ,respectively, equal to ۲۹۸۷۹.۵۳ and ۱۵۹۴۰.۱۰,
کلیدواژه ها:
نویسندگان
Hamid Akbarpour
Department of Sewing and Garment Design Technology Engineering, Technical and Vocational University (Tohid), Amol, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :