The Effect of Powder Composition on Cyclic Oxidation Behavior of CO-Deposited Al-Si Cating on Nickle-Based Superalloy
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 17، شماره: 2
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 112
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-17-2_011
تاریخ نمایه سازی: 1 اسفند 1401
چکیده مقاله:
In this study, Si-modified aluminide coating on nickel-base superalloy IN-۷۳۸LC was prepared using a pack cementation method with various powder compositions at ۱۰۵۰ °C for ۶ h. The cyclic oxidation test was conducted at ۱۰۰۰ °C followed by cooling at room temperature for ۲۰۰ h and ۲۰ cycles. The effect of powder composition and the way of cooling on the coatings microstructure and oxidation behavior were studied. Investigations carried out using a scanning electron microscope (SEM), EDS analysis, and XRD. Microstructural observations revealed that the coating thickness of ۲۹۳ and ۲۷۴ µm was achieved in the case of using pure Al and Si powder and alloyed Al-۲۰wt.%Si one in the packed mixture, respectively. It was also found that utilizing pure Al and Si powder with NH۴Cl as an activator in the pack led to the formation of silicide coating, owing to the higher diffusion of Si, which showed superior cyclic oxidation performance.
کلیدواژه ها:
نویسندگان
M. Ghasemian Safaei
Iran University of Science and Technology
S. Rastegari
Iran University of Science and Technology
R. Latifi
Iran University of Science and Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :