Hot Deformation of the Mn-Ni-Cr Alloy During Compression

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 199

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMSEI-17-1_010

تاریخ نمایه سازی: 1 اسفند 1401

چکیده مقاله:

In this paper a constitutive equation was considered for the isothermal hot compression test of the Mn-Ni-Cr alloy. The hot compression test was performed in the strain rate range of ۰.۰۰۱-۰.۱ s-۱ and deformation temperature was varied from ۷۰۰ to ۹۰۰ °C. A considerable reduction in flow stress was observed regardless of the strain rate when temperature was increased from ۷۰۰ to ۷۵۰ °C. DTA and XRD evaluation revealed that the removal of Mn۳Cr phase and formation of the single solid solution phase were the reason for the flow stress reduction. At the low deformation temperature (۷۰۰°C) and the high strain rate (۰.۱ s-۱), a partially recrystallized microstructure was observed; this was such that with increasing the temperature and decreasing the strain rate, a recrystallized microstructure was completed. Also, the relationships between flow stress, strain rate and deformation temperature were addressed by the Zener-Holloman parameter in the exponent type with the hot deformation activation energy of ۳۰۱.۰۷ KJ/mol. Finally, the constitutive equation was proposed for predicting the flow stress at various strain rates and temperatures.

نویسندگان

M. Sadeghi

Materials Engineering Department, Malek Ashtar University of Technology, Shahin Shahr, Iran

M. Hadi

Department of Materials Science and Engineering, Golpayegan University of Technology, Golpayegan, Iran

O. Bayat

Department of Materials science and Engineering, Hamedan University of Technology, Hamedan, Iran

H. Karimi

Materials Engineering Department, Malek Ashtar University of Technology, Shahin Shahr, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Kasper JS, Kouvel JS. The antiferromagnetic structure of NiMn. Journal ...
  • Nakamichi T, Yamamoto M. Composition, Temperature and Ordering Dependence of ...
  • Hicks TJ, Pepper AR, Smith JH. Antiferromagnetism in γ-phase manganese-palladium ...
  • Dean AV, Ennis PJ, inventors; Huntington Alloys Corp, assignee. Manganese-nickel ...
  • Laux B, Piegert S, Rösler J. Advancements in fast epitaxial ...
  • Schwartz MM. Source Book on Brazing and Brazing Technology. American ...
  • Zhou L, Yang L, Peng Y, Fei L, Zhu X. ...
  • Yang X, Zhang L, Shi Y, Yu S, Hua W. ...
  • Huang HQ, Di HS, Yan N, Zhang JC, Deng YG, ...
  • Lai L, Zhang K, Ma M, Li X, Li Y, ...
  • Liu W, Zhao H, Li D, Zhang Z, Huang G, ...
  • Liu H, Liu B, Li D, Jin X, Zhang Y. ...
  • Gokcen NA. The Mn-Ni (manganese-nickel) system. Journal of phase equilibria. ...
  • Hadi M, Kamali AR. Investigation on hot workability and mechanical ...
  • Humphreys FJ, Hatherley M. Recrystallization and related annealing phenomena Elsevier. ...
  • Hadi M, Meratian M, Shafyei A. The effect of lanthanum ...
  • Hadi M, Shafyei A, Meratian M. A comparative study of ...
  • Hu HE, Zhen L, Yang L, Shao WZ, Zhang BY. ...
  • Wei GZ, Lu X, Ke FS, Huang L, Li JT, ...
  • Lin YC, Chen XM. A critical review of experimental results ...
  • Reyes-Calderón F, Mejía I, Cabrera JM. Hot deformation activation energy ...
  • Pernis R, Kasala J, Boruta J. High temperature plastic deformation ...
  • Kratochvíl P, Schindler I. Hot rolling of iron aluminide Fe۲۸. ...
  • نمایش کامل مراجع