A comparative study for the rejection of nickel ions from waste water by PES, fMWCNTs/PES, TiO۲/PES and TiO۲-fMWCNTs/PES mixed matrix membranes
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 157
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JORNA-1-1_004
تاریخ نمایه سازی: 14 اسفند 1401
چکیده مقاله:
In this study, the neat polyethersulfone (PES) membrane and the mixed matrix membranes (MMMs) containing ۲۰ wt. %polyethersulfone (PES) and different amounts of functionalized multi-walled carbon nanotubes (fMWCNTs), TiO۲, and TiO۲ coated on fMWCNTs were fabricated by wet phase inversion and conventional casting methods. The nickel ions rejection and permeate flux performance were then investigated and compared by these fabricated membranes. The characteristics of the membranes were performed by field emission scanning electron microscopy (FESEM), transmissionelectron microscopy (TEM), and contact angle (CA) measurement. The operational parameters such as polymer concentration, pressure, pH, time and nickel ion concentration for nickel ions rejection and permeability were firstly optimized on the neat PES membrane. The performance of MMMs containing various amounts of nanoparticles was then evaluated and compared under these optimized conditions. The obtained results indicated that the membrane containing ۲۰ wt. % PES, and operational conditions like pressure ۱۵bar, low concentration of nickel, time =۳۰min, and various amounts of pH were the best conditions to achieve the highest rejection percentage of nickel ions and permeate flux. In such operational conditions, PES/fMWCNTs and PES/TiO۲ membranes have the highest nickel ion rejection and permeate flux, respectively. Totally the prepared mixed matrix membranes showed that they have higher ability to reject nickel ions from wastewater and a higher permeate flux value compared with the neat PES membrane.
کلیدواژه ها:
نویسندگان
Ramin Yavari
Material and Nuclear Fuel Scholl, Nuclear Science and Technology Research Institute, (NSTRI),
Hooman Alipoor
Caspian Faculty of Engineering, College of Engineering, University of Tehran,P.O. Box ۴۳۸۴۱-۱۱۹,Guilan
Mohammad Ali Aroon
Caspian Faculty of Engineering, College of Engineering, University of Tehran, P.O. Box ۴۳۸۴۱-۱۱۹, Guilan
Hassan Aghayan
۴Material and Nuclear Fuel Scholl, Nuclear Science and Technology Research Institute, (NSTRI), P.O.Box. ۱۱۳۶۵-۸۴۸۶, Tehran, Iran
Taher Yousefi
nstri
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :