Application of nano indentation test to derive the mechanical parameters of rocks
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 167
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NPGC04_056
تاریخ نمایه سازی: 16 اسفند 1401
چکیده مقاله:
Rock properties and present-day stresses are paramount parameters in developing of the rock mechanical model of a reservoir. Precise model is the basic requirement of different studies related to drilling geomechanics (borehole stability and safe mud weight window and etc.), completion geomechanics (hydraulic fracture, perforation, sand production and etc.) and reservoir geomechanics (fault reactivation, caprock integrity, porosity and permeability changes and etc.). Crushed particles of core samples are a superb source of data for mechanical parameters. Nano indentation equipment operates on small crushed samples to derive hardness or elasticity modulus. As such, this research attempts to focus on the Nano indentation result to evaluate the modulus obtained indirectly from common well logging correlations. Multiple well logs data is used to derive initial modulus's estimation and results are compared with indentation tests with depths around odder of ۱۰ Nanons done by Vicker indenter. According to statistical distribution analysis, there is a high correlation between the hardness and elasticity modulus achieved from indentation experiments and the values obtained from the field logging interpretations.
کلیدواژه ها:
نویسندگان
Najmeh Jafarizadeh
Geology Department, Shahid Chamran University of Ahvaz | Ahvaz, Iran
Ayub Elyasi
Geomechanics Department, CAPE Consultant Group | Tehran, Iran
Ali Kadkhodaie
Geology Department, University of Tabriz | Tabriz, Iran
Mahsa Abdollahi
۴Geology Department, Birjand University | Birjand, Iran