Dynamic and Quasi-Static Plastic Behavior of Single and Nested Thin-Walled Square Tubes Under Lateral Loading
محل انتشار: فصلنامه مکانیک جامد، دوره: 15، شماره: 1
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 127
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-15-1_007
تاریخ نمایه سازی: 26 فروردین 1402
چکیده مقاله:
This paper investigates the dynamic and quasi-static plastic behavior of single and nested mild steel square tubes under lateral loadings experimentally and numerically. The dynamic experimental tests are carried out using a gas gun and the dynamic force-time responses are measured with a load cell. Also, the quasi-static experimental tests are performed in a universal test machine. The dynamic experimental tests are also simulated with the finite element software Abaqus. Furthermore, the square tubes’ combinations in the nested systems are investigated in the present work. It is revealed that the amount of peak load decreases significantly when the form of the single tube changes from square to lozenge. It is also observed that in the nested tube structures, by changing each of the outer or inner tubes or both of them from the square form to lozenge one, the amount of peak load decreases meanwhile the energy absorption capacity decreases too, which is not desirable for energy absorbers. By comparing the impact results of both the single and nested square tubes which have the same mass, it can result that the nested square tubes behave better as energy absorbers compared with the single tubes.
کلیدواژه ها:
Single and nested square tubes ، High rate and quasi-Static lateral loading ، Experimental and numerical investigation ، energy absorption ، Gas gun
نویسندگان
B Shabani
Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran
S Gohari Rad
Department of Mechanical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran
A Alijani
Department of Mechanical Engineering, Bandar Anzali Branch, Islamic Azad University, Bandar Anzali, Iran
R Rajabiehfard
Department of Mechanical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :