microstructural investigation for Nd:YAG pulsed welding of 321 stabilized stainless steel
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,312
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_005
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
laser welding with low power density is the best methods for welding delicate materials in this study Nd:YAG pulsed laser welding with the power of 80w was used to weld AISI321 stainless steel samples investigations were carried out by optical microscopy scanning electron microscopy -x-ray diffraction analysis and hardness tests the microstructural study shows austenitic microsturcture with a little delta ferrite the cellular and dendritic microstructures were produced upon solidification due to high cooling rate produced in the laser welding process the study shows that the hardness of fusionbounary of weld zone is reduced due to low concentration of titanium moreover the study shows that hardness increases in the weld zone due to high cooling rate of laser welding process.
کلیدواژه ها:
نویسندگان
a.r sufizadeh
university of tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :