an investigationof welded AISI 4130 steel behavior during tensile deformation using acoustic emission technique
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,620
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_007
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
metallurgical welding joints are extensively used in the fabrication industry including ships offshore structures steel bridges and pressure vessels when welding a long butt-welded joint residual stresses and distortions can occur near the weld bead due to localized heating by the welding process and subsequent rapid cooling high residual stresses in regions near the weld may promote brittle fractures fatigue or stress corrosion cracking residual stresses in the base plate may reduce the bckling strength of the structure members the use of fracture mechanics enables a critical defect size in a structure to be specified at a given operating stress provided that the fracture toughness and yield properties of the material are known acoustic emission technique AET is widely used to characterise the deformation and fracture processes in materials .
کلیدواژه ها:
نویسندگان
s.ali ebrahimian
dezful branch azad university
m ahmadi
amirkabir university
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :